Important Safety Instructions -------------------------------------------------------- Characteristic Features -------------------------------------------------------- Disc Information --------------------------------------------------------------------------- Front View ---------------------------------------------------------------------------------- Rear View ----------------------------------------------------------------------------------- Remote Control----------------------------------------------------------------------------- System Connections ------------------------------------------------------------------- Connecting to External AV Signal Source (AV1) ------------------------------ Connecting to External AV Signal Source (AV2 & S-VIDEO) -------------- Connecting to External AV Signal Source (Component) -------------------- Connecting to PC --------------------------------------------------------------------- Connecting to TV Signal ------------------------------------------------------------ Connecting to Power Adapter -----------------------------------------------------...
Important Safety Instructions The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “Dangerous Voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Page 4
Important Safety Instructions Note: Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Maintain well ventilated conditions around the product. Do not put product on bed, sofa or anything that blocks ventilation.
Characteristic Features This product incorporates a DVD player, LCD display and TV receiver in one system. Multiple Modes DVD mode TV mode AV1 mode AV2 mode S-VIDEO mode COMPONENT mode VGA mode High Quality Property High Resolution Adopt an MPEG2 decoding format to achieve horizontal resolution more than 500 lines.
Disc Information Discs Formats Supported By This Player DISC LOGO JPEG DivX The operating method of some DVD discs is specified by the software maker. Please refer to the instruction manual of the disc. The DVD Player will play most recordable (CD-R) or erasable (CD-RW) CDs, but playback of CD-R or CD-RW discs created on a computer requires proper formatting and finalisation of the disc for audio playback.
Front Panel Front View CARD button Press to enter SD or MS card mode in the DVD mode. Previous Skip button Press once to skip to the beginning of the current chapter/track. Press twice repeatedly to skip to the previous chapter/track for some discs under DVD mode. Next Skip button Press to skip to the next chapter/track for some discs under DVD mode.
Front Panel Disc Tray Slot Used to load disc. SOURCE/ENTER button Press to select the modes: DVD, TV, AV1, AV2, S-VIDEO, Component, VGA. Press to confirm selection or exit the setup menu in the setup menu. MENU button Press to enter or exit setup menu. button In TV mode, press to select channels.
Rear Panel Rear View VGA Input Jack Connected to the VGA output jack on a personal computer. Antenna Input Jack Connected to external antenna to receive the TV program in TV mode. Video Input Jack In AV1 mode, connecting for the external video signal input.
Remote Control Remote Control Drawing POWER button Press to enter or exit the standby mode. TV button Press to enter TV mode. DVD button Press to enter DVD mode. P.M. button Press to select picture mode. S.M. button Press to select audio mode. 0-9 Number buttons Press to select numbers.
Page 11
Remote Control MENU button (in DVD) Press to access the disc menu in DVD mode. Under teletext mode, press to enter or exit mixed mode. SETUP button Press to enter DVD setup menu. Under Teletext mode, press to display the index page.
Remote Control 40. GOTO button Press to access or exit from the search menu under DVD mode. Under teletext mode, press to display real clock, press the EXIT button to exit. Preparation of Remote Control Softly push the back cover to open the battery compartment.
System Connections Do not connect the power cord until all other connections have been made. Ensure that you observe the colour cord when connecting audio and video cables. Connecting To External AV Signal Source (AV1) Use the audio and video cable to connect the input jacks on the rear panel of the unit to the external AV signal source.
System Connections Connecting to External AV Signal Source (AV2 and S-VIDEO) Use the audio and video cable to connect the AV2 input jacks on the rear panel of the unit to the external AV signal source. Use the S-VIDEO cable to connect the S-VIDEO input jack on the rear panel of the unit to the external AV signal source.
System Connections Connecting to External AV Signal Source (Component) Use the audio and video cables to connect the Y/Pb(Cb)/Pr(Cr) input Jacks on the rear panel of the unit to the external AV signal source. After connection, turn on the power of the unit and external AV signal source, press the SOURCE button to shift to component mode.
System Connections Connecting to PC The unit can be connected to PC (person computer) via the VGA cable. Follow the figure below to connect: 1. Connect one end of the VGA cable to the VGA input jack on the rear panel of the unit. 2.
System Connections Connecting to TV-Signal Input This unit can be connected to the TV signal input source via the 75 panel. After connection, turn on the power of the unit, press the SOURCE button to shift to TV mode. Connecting to Power Adapter Power is supplied through the provided appropriative power adapter, one end is connected to the DC 12V IN jack on the rear panel of the unit, the other end to the AC100~240V wall outlet.
System Connections Connecting to Earphones This unit can be connected to an earphone for listening music privately. See the below figure for details: After connecting to the earphone, the internal speakers output will turn off automatically.
System Setup and Operation Preparations 1. After connection, press the POWER button to turn on the power. (If it is turned on, the power indicator is blue.) 2. Press the SOURCE button to shift mode. You can go on with the following operations: Image Setting Press the MENU button once to enter the setup menu, as shown on the right:...
System Setup and Operation Sharpness Setup Press the button to select Sharpness, Press the MENU button to return to the previous menu. Advanced Setup Press the button to select Advanced, press the ENTER button to confirm and enter the item. In the menu, press the button to select the desired item, press the ENTER button to confirm, press the MENU button to return to the previous menu.
System Setup and Operation Listen Mode Setup Press the button to select Listen Mode, press the ENTER button to enter, press the button to select items, press the ENTER button to confirm. Press the MENU button to return to the previous menu.
Page 22
System Setup and Operation Tuner/Channel Press the button to select the Tuner/Channel press the ENTER button to enter the menu as shown on the right. Press the button to select the desired items, press the ENTER button to enter the item.
Page 23
System Setup and Operation Channel Name Press the button to select the Channel Name, press the ENTER button to enter the setup, and then press the button to select the input position, press the press the number button to input number, press the ENTER button to confirm input. Press the MENU or EXIT button to exit.
Page 24
System Setup and Operation Fine Tune Press the button to select the Fine Tune, press the or backward. Press the MENU button to return to the previous menu. Store Press the button to select the Store, press the ENTER button to store the fine tuning effect. Back Press the button to select the Back, press the ENTER button to cancel the fine tuning effect.
DVD Playback Operation Preparation: After connections have been made, turn on the TV and select the relevant video input before playback. Disc Loading Steps: Press the power button on the front panel to turn on the power, the player will search a disc and play it automatically in DVD mode.
Page 26
CD Playback Operation Repeat Use the REPEAT button to repeat a chapter, a title or all, and also to cancel repeat. GOTO During DVD disc playback, press the GOTO button on the remote control once, there will be a menu displayed on the screen. You can set or select items for your preference. Use the direction buttons to select items, press the ENTER button to enter and use the direction buttons to select the desired item.
DVD Playback Operations Stop Press this button once to stop playback and then press PLAY button to resume it. Press the button twice to stop playback completely. Fast Playback Press the fast FWD/REV SCAN button on the remote control to activate fast forward or rewind playback.
DVD Playback Operations Repeat Press the REPEAT button to repeat a file, folder in sequence. Press it repeatedly to display as follows: Shuffle Random Single Menu Press the MENU button during playback to return to root folder. Press the PLAY button to resume normal playback.
Page 29
DVD Playback Operations Repeat During playback, press it repeatedly, and the repeat modes are Folder, Shuffle, Random, Single, Repeat One and Repeat All. Previous and Next During playback, press the button to select picture. In the menu mode, press to turn to the next or previous page.
DVD Setup Menu DVD Setup Menu This is the place where you arrange all important settings for the cooperation of the DVD with the TV set and other audio equipment. Remove the disc from the DVD drive and press the 'SETUP' button on the remote control, the settings menu will appear.
DVD Setup Menu Captions You can choose captions on or off on screen during playback. Screen Saver When you enable this function a moving DVD symbol appears on the screen when the unit is stopped or showing a still picture for a moment. This feature saves screen from getting damaged by constant picture.
Page 32
DVD Setup Menu Preference Page - - Preference Page - - Audio Subtitle Disc Menu Parental Password Default Preferred Audio Language Audio Please select your preferred language to playback DVD movies in general. Sure this selection is subject to the audio material on the particular disc.
Attaching the Speaker Follow the below steps to attach the speaker: Take out the unit, speaker and the fixing implements. Insert the plastic tabs of the speaker into the holes on below rear panel of the unit, and slide it leftward, see the below figure Fix the speaker with fixing implements, see the below figure...
Troubleshooting SYMPTOM The player cannot play. There is no sound. LCD is no display Cannot continue to play and play a section repeatedly. There is no picture or the picture moves up and down Unsteady. The remote control does not work.