DeVilbiss Dagr Instruction And Maintenance
  1. Manuals
  2. Brands
  3. DeVilbiss Manuals
  4. Airbrushes
  5. DAGR
  6. Instruction and maintenance

DeVilbiss Dagr Instruction And Maintenance

Hide thumbs Also See for Dagr:
Table of Contents

Advertisement

Quick Links

Download this manual
AIRBRUSH INSTRUCTIONS AND MAINTENANCE
Thank you for purchasing your DeVilbiss
DAGR™ airbrush! You will find that this
high quality, versatile airbrush gives the
demanding professional artist the full
range of performance—from spraying fine
lines to wide backgrounds—with a wide
range of materials—from solvent-based
automotive paints to waterbase inks.
DAGR airbrushes are precision made
with micro machining and high quality
materials. Each airbrush is spray tested
before being packaged in its collectorʼs
tin, assuring that it meets the tough quality
standards you have come to expect from
DeVilbiss. With proper care, your DAGR
airbrush will provide you with excellent
performance to express your creativity.
™
by
SPECIFICATIONS
Operating Pressures:
20 to 50 psi
Maximum Inlet Pressure:
175 psi
Airbrush Plating:
Nickel, copper, chrome
Needle Packing:
Teflon ® (solvent-proof)
GET READY TO SPRAY
SAFETY FIRST
Please read all safety information on
pages 8 and 9.
Service Bulletin
SB-2-055-B
Replaces SB-2-055-A
Connect to Compressed Air
Connect
your
DAGR
airbrush
regulated air line or select an appropriate
compressor. The DeVilbiss Airblade™
single piston compressor is a compact,
economical choice for the beginner and
will provide approximately 25-30 psi of air
pressure to the DAGR airbrush. The two-
piston DeVilbiss Airblade Deuce™ can
provide up to 50 psi to the DAGR airbrush
and will give you complete versatility.
At 35-40 psi, the DAGR will produce a
high paint flow for shadow, fade, and
background spray, as well as for detail
work and fine lines.
to
a

Advertisement

Table of Contents
loading

Related Manuals for DeVilbiss Dagr

Summary of Contents for DeVilbiss Dagr

  • Page 1 Nickel, copper, chrome piston DeVilbiss Airblade Deuce™ can DAGR airbrushes are precision made Needle Packing: provide up to 50 psi to the DAGR airbrush Teflon ® (solvent-proof) with micro machining and high quality and will give you complete versatility. materials. Each airbrush is spray tested At 35-40 psi, the DAGR will produce a before being packaged in its collectorʼs...

  • Page 2: General Operation

    Increasing the air pressure will also affect thicker paints or higher paint flow will proper solvent. Filter it through a nylon the spray width. The DAGR will spray a require higher pressures. mesh strainer. It is best to "over-reduce" background width of approximately two or prepare the paint relatively thin and inches.

  • Page 3: Cleaning And Lubrication

    SB-2-055-B Page 3 Stippling (Dots) Crown Cap After Each Spray Session Stippling (coarse or fine dots) can add The crown cap (#1) is used to protect the Increase the air pressure and spray special textured effects to artwork. Simply needle when spraying a fine line and to cleaning solution through the airbrush.

  • Page 4: Replacement Parts And Accessories

    (like it back slightly. To do this, remove the Quick Disconnect DeVilbiss Spray Lube). Wipe the needle handle (#21), loosen the needle locknut (Optional Accessory) with a soft cloth, leaving it lightly coated.

  • Page 5: Troubleshooting

    SB-2-055-B Page 5 TROUBLESHOOTING CAUSE CORRECTION CAUSE CORRECTION Skipping: Will Not Spray: 1. Air pressure too high 1. Reduce pressure 1. Clogged nozzle 1. Refer to "Cleaning and Lubrication" 2. Paint too thick 2. Reduce with solvent 2. Loose head cap 2.

  • Page 6: Trigger Buttons

    Page 6 SB-2-055-B Trigger Buttons Trigger Buttons...
  • Page 7 Trigger button B – – Trigger button C – – Trigger button D • DAGR Repair Kit 802635 (DGR-121K) includes: Ref. Description Qty. O-ring (head cap & handle) Air valve washer 17 Needle spring 22 O-ring (pre-set needle knob) 1...
  • Page 8 Page 8 SB-2-055-B Use a mask or respirator whenever there is a chance of inhaling sprayed materials. The mask must be compatible with the material being sprayed and its concentration. Equipment must be as prescribed by an The following hazards may occur industrial hygienist or safety expert, and be during the normal use of this HAZARD: SOLVENT SPRAY...
  • Page 9 15). Users must comply with all local and lessening factors 1-7. 1. High frequency of the activity. national codes of practice and insurance This product is covered by DeVilbissʼ company requirements governing ventilation, 2. Excessive force, such as gripping, pinching, 1-year Limited Warranty fire precautions, operation, maintenance, and or pressing with the hands and fingers.

  • Page 10: Ec Declaration Of Conformity

    EC Declaration of Conformity We, DeVilbiss Automotive Refinishing, 1724 Indian Wood Circle, Suite J-K, Maumee, Ohio 43537, USA, as the representative/manufacturer of the item listed: Airbrush model DGR-501G, declare, under our sole responsibility, that the equipment to which this document relates is in conformity with the following standards...

Table of Contents