Download Print this page

Childcare 121315-002 Quick Start Manual page 2

Adaptor for hipod / unity car seat

Advertisement

Assembly / Operating Instructions
To attach adaptor
1. Assemble both plastic brackets to the metal frame with four sets of bolt
and nuts as shown in the diagram.
2. Fit the whole adaptor onto the sides of the stroller frame.
3. Ensure that the bracket is engaged to the appropriate tab according to
the stroller frame tube diameter. (Refer to the images on the previous page
under "IMPORTANT").
4. Swing the lever of the adaptor into lock position.
5. Clip the press stud on the safety strap to the press stud on the adaptor.
6. Repeat previous steps for the left adaptor on the opposite side.
WARNING: Always ensure that the safety strap on the adaptor is closed by applying the press
stud for security before proceeding with the next step.
Insert car seat onto adaptor
Attach the Hipod / Unity Car Seat as per car seat manufacturer's instructions onto the metal frame of
the adaptor assembly.
WARNING: Ensure the Hipod / Unity Car Seat is fully engaged and locked before use.
Folding Stroller
NOTE: Both plastic brackets and metal frame must be removed from
the stroller frame before folding stroller. Brackets and frame can remain
attached to each other when removing from stroller.
1. Remove the baby car seat from metal frame.
2. Unclip press stud of the safety strap on both adaptors.
3. To release adaptor, unclip them outwards away from the stroller frame.
4. Remove adaptor and frame assembly.
How to care for your Childcare Adaptor
Care and maintenance
To ensure the long-lasting use of your adaptor wipe down with a damp cloth and use a mild soap solution if necessary. Do not
use abrasive cleaners. Always store product in a clean dry place.
Maintenance
Always check parts regularly for tightness of screws, nuts and other fasteners – tighten or replace if required. To maintain the
safety of your adaptor, seek prompt repairs for bent, torn, worn or broken parts. Use only those parts and accessories approved
by CNP Brands.
STROLLER HIPOD / UNITY
Adaptor Model # 121315-002
1
Stroller Hipod/Unity
Adaptor fully assembled
1
2
3
2
4

Advertisement

loading