Onkyo pmn Instruction Manual page 12

Connecting to components other than the Separate Col-
lection Series
Connecting a sound processor
You can connect a sound processor (e.g. graphic equalizer, surround processor, etc.) to the unit.
Before connecting
• Disconnect the jumper plugs using the PROCESSOR connectors.
– Please retain them for future use.
– Never connect the jumper plugs to the other connectors, as this may cause the unit to malfunc-
tion, so that the sound is not reproduced.
– If you do not use the PROCESSOR connectors, reconnect the jumper plugs to them firmly.
Connections
1
Remove the jumper plugs.
I N
S O R
O U T
C E S
P R O
2
Connect the sound processor to the unit.
This unit
OUT(REC) IN(PLAY)
L L
R R
LINE-2 LINE-1 TAPE
CONTROL
OUT(REC) IN(PLAY)
L
R
TUNER CD MD
L
R
TUNER
: Signal flow
12
Jumper plug
L
SPEAKERS
INTEGRATED
STEREO AMPLIFIER
MODEL NO. A-905X
RATING;
REMOTE
R
AC OUTLET
AC230V 50Hz
SWITCHED
OUT IN SUBWOOFER
PROCESSOR PRE OUT 100W MAX.
OUT(REC) IN(PLAY)
CD MD
IN SUBWOOFER
OUT
PROCESSOR
PRE OUT
INPUT
Sound processor
OUTPUT