Download
Share
Print this page
SPORTSPOWER SW-003 User And Assembly Manual
  1. Manuals
  2. Brands
  3. SPORTSPOWER Manuals
  4. Baby Swing
  5. SW-003
  6. User and assembly manual

SPORTSPOWER SW-003 User And Assembly Manual

2-in-1 swing
Hide thumbs

Advertisement

Quick Links

Download this manual
2-IN-1 SWING
USER AND ASSEMBLY MANUAL
Tips : It will take 2 people around 45 mins to assemble this product.
!
WARNINGS!
- Misuse and abuse of this product can result in injury.
- Read instructions before assembly or using this product. Retain Instructions.
- Always inspect product before use, checking for worn, defective or missing parts.
- The single swing is suitable for age 3-8 years with maximum user weight of 45 kg(99 lbs).
- The nursery swing is suitable for ages 12-36 months with maximum user weight of 25 kg(55 lbs).
- Do not stand on the swing.
- Adult supervision at all times.
- Only for outdoor and domestic use.
Save this instruction manual for future reference
For Customer Service, please call 1-866-632-1718 or visit www.partsnservice.com
Monday – Friday 9:00 AM – 5:00 PM Eastern Time
Sportspower Ltd
Level 20, Parkview Centre 7 Lau Li Street, Causeway Bay, Hong Kong

Advertisement

loading
Need help?

Need help?

Do you have a question about the SW-003 and is the answer not in the manual?

Questions and answers

Related Manuals for SPORTSPOWER SW-003

Summary of Contents for SPORTSPOWER SW-003

  • Page 1 Save this instruction manual for future reference For Customer Service, please call 1-866-632-1718 or visit www.partsnservice.com Monday – Friday 9:00 AM – 5:00 PM Eastern Time Sportspower Ltd Level 20, Parkview Centre 7 Lau Li Street, Causeway Bay, Hong Kong...
  • Page 2 Before you start... We suggest you spend some time reading this guide before follow - • ing the simple step-by-step assembly instructions. • Do not discard any of the packaging until you have checked that are parts and hardware are included. When discarding the packaging, please consider others and the environment.

  • Page 3: Safety Information

    SAFETY INFORMATION IMPORTANT - Please read these instructions fully before assembly or use. Top Tips before you start Instruct children to avoid swinging the empty swing and not twist the swing chain or loop them over the top support bar since this may reduce the strength of the WARNING.
  • Page 4 CONTENTS x1 Beam x2 Leg Tube x2 Leg Tube x4 Leg Tube x2 Rail x4 Leg Tube x4 Anchor x1 Single Swing Seat x1 Nursery Swing x4 Plastic Cap x2 (M8) x8 (M6x38mm) Seat x4 (M6x53mm) x4 (M6x42mm) x8 (Φ8.5 x Φ19mm) x32 (Φ6.5 x Φ14mm) x4 (Φ8.5 x Φ13.5mm) x16 (Φ6.5 x Φ10mm)
  • Page 5 ASSEMBLY step 1 ● Insert Legs (2) and (3) into Beam (1) as shown in FIGURE1. ● Please note the order of Legs (2) and (3) need to be inverse on the two sides of the beam. FIGURE 1...
  • Page 6 ASSEMBLY step 2 ● Insert Legs (4) into (2) and (3). ● Secure with B,F,I and K in the sequence shown in FIGURE 2. FIGURE 2 x 4 x 4...
  • Page 7 ASSEMBLY step 3 ● Attach Plastic Cap (10) to each side of Rail (5) Secure Rail to Legs (4) on both sides of the swing using D,F,I and K in the sequence shown in FIGURE 3. FIGURE 3 x 4 x 4...
  • Page 8 ASSEMBLY For Nursery Swing Seat step 4 (See steps 6 and 7 for Single Swing Seat) ● Secure the swing to Beam (1) using A, E, H, and J in the sequence shown in FIGURE 4. FIGURE 4 x 4 x 4...
  • Page 9 ASSEMBLY For Nursery Swing Seat step 5 (See steps 6 and 7 for Single Swing Seat) Note: Lock the seat belt tightly over the child shown in FIGURE 5. FIGURE 5 CONSTANT ADULT SUPERVISION REQUIRED AT ALL TIMES DURING USE.
  • Page 10 ASSEMBLY step 6 For Single Swing Seat ● Attach Legs (6) to (4) using B,F,I and K in the sequence shown in FIGURE 6. FIGURE 6 x 4 x 4...
  • Page 11 ASSEMBLY step 7 For Single Swing Seat ● Secure the swing to Beam (1) using A, E, H and J in the sequence shown in FIGURE 7. FIGURE 7 x 4 x 4 P.10...
  • Page 12 ASSEMBLY step 8 For Nursery and Single Swing Seat ● Attach Anchor (7) to the base of all four Legs (6) using C,F,I and K in the sequence shown in FIGURE 7. IMPORTANT: AFTER COMPLETING ALL THE STEPS, GO OVER THE ENTIRE UNIT AND TIGHTEN ALL BOLTS BEFORE ALLOWING CHILDREN TO USE.
  • Page 13 ASSEMBLY step 9 For Nursery and Single Swing Seat ● Position the anchors at 45 degree angle and secure them fully into the ground until the leg of the swing is standing flat and stable on the ground. P.12...
  • Page 14 ASSEMBLY step 10 SEAT ADJUSTABLE GUIDE THE LENGTH OF THE ROPE IS ADJUSTABLE FOR THE HEIGHT OF THE CHILD THROUGH THE SEAT CONNECTOR. TO ADJUST, LOOSEN THE KNOT ON THE SEAT CONNECTOR, PULL ROPE THROUGH THE HOLES AND TIGHTEN AGAIN. MAKE SURE THAT THE KNOTS ARE TIGHT AND THAT BOTH ROPES ARE ADJUSTED SO THAT THE SEAT IS HORIZONTAL.

  • Page 15: Care And Maintenance

    CARE AND MAINTENANCE General This 2-in-1 Swing was designed manufactured with quality materials and craftsmanship. If correct care and maintenance is provided, it will provide users with years of exercise, fun and enjoyment. Inspect regularly for: •Nursery Swing is suitable for children between ages 12-36 months with maximum weight of 25 kg(55 lbs).

  • Page 16: Product Warranty

    PRODUCT WARRANTY Sportspower Ltd warrants its products to be free from defects in material and workmanship under normal use and service conditions for ninety (90) days after the date of purchase. Extended warranty from 90 to 180 days will be offered to those customers registering their products at www.sportspowerltd.net within 14 days from the date of purchase.