Advertisement
Quick Links
ASSEMBLY INSTRUCTION, CARE, MAINTENANCE AND USER'S GUIDE
- This product is intended for children aged 12-36 months, weighing not
more than 55Ibs (25kg).
Assembly requires two adults .
-
WARNING - Do not allow more than one child to play on the individual swing at the
same time .
For Customer Service, please call 1-866-370-2131 or visit
LEVE 20, PARKVIEW CENTRE,7 LAU LI STREET, CAUSEWAY BAY, HONG KONG
TODDLER SWING
MODEL FNS-001
OWNER'S MANUAL
FOR RESIDENTIAL USE ONLY
Monday – Friday 9:00 AM – 5:00 PM Eastern Time
Sportspower Ltd.
www.sportspowerltd.net
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for SPORTSPOWER FNS-001
Summary of Contents for SPORTSPOWER FNS-001
- Page 1 TODDLER SWING MODEL FNS-001 OWNER’S MANUAL ASSEMBLY INSTRUCTION, CARE, MAINTENANCE AND USER’S GUIDE FOR RESIDENTIAL USE ONLY - This product is intended for children aged 12-36 months, weighing not more than 55Ibs (25kg). Assembly requires two adults . WARNING - Do not allow more than one child to play on the individual swing at the same time .
- Page 2 Warnings: Observing the following statements and warnings reduces the likelihood of serious injury. It is designed for children aged 12-36 months with maximum weight of 55Ibs (25kg). Only one child per seat at any one time. Teach children to sit in the center of the swing seat, with full weight in the center of the seat. DO NOT allow children to lean to the side when on swing seats or to collide with other playmates.
- Page 3 At the end of each play season, remove all plastic parts and take indoors. DO NOT allow the use of plastic items when the temperature drops below 32° F/0° C. Dispose of all packaging properly after the unit has been assembled. Check all nuts and bolts for tightness and tighten when required.
- Page 4 Parts x 4 (M6 x 1.3") x 2 (M6 x 1.5") x 2 (M6 x 1.9") x 14 (Φ0.26" xΦ0.55") x 6 (Φ0.26" xΦ0.4") x 2 (Φ0.26" xΦ0.55") x 2 (M6) x 6 (M6) x 1 (4mm)
- Page 5 Assembly Instructions Step 1 Insert the leg (#2) into beam (#1) and secure using bolt(A), arc washer(D), spring washer(F) and nut(H) as shown below. x4 x8 x4 x4 A D F H Tightening Nuts & Bolts • At the start of assembly, DO NOT tighten bolts/nuts all the way, so to allow some possible adjustment.
- Page 6 Step 2 Insert the leg (#3) into beam (#2). Attach rail (#4) to the outer sides of leg (#2) as shown below. D F H x2 x4 x2 x2 x2 x2 x2 x2 x2...
- Page 7 Step 3 Lock the seat base in place by inserting plastic pin (#5) on both sides of the seat as shown.
-
Page 8: Step 4 - Using The Seat Belt
Step 4 - USING THE SEAT BELT Push both connectors into the middle buckle. - Page 9 Step 5 If necessary, adjust the buckle strap to the upper slot as shown to properly secure your child.
- Page 10 Step 6 - FOLDING THE SWING When this unit is not in use, it can be folded and stored away. To fold, unscrew the thumb screw and revolve the side bar until it is clamped into the plastic anchor. Please refer to figures shown below.
-
Page 11: Maintenance Checklist
MAINTENANCE CHECKLIST Check all nuts and bolts before each use and tighten as required. We recommend you check the swing beam and hardware every two weeks. It is particularly important that this procedure be followed at the beginning of each season Oil all metallic moving parts monthly during the usage period. -
Page 12: Manufacturer's Limited Warranty
MANUFACTURER’S LIMITED WARRANTY Sportspower Ltd. warrants its overall product for 1 year from the date of purchase. This includes the foam pads, as well as all swing set parts. Products are warranted to be free of defects in material and workmanship under normal use and service conditions.
Need help?
Do you have a question about the FNS-001 and is the answer not in the manual?
Questions and answers
I’m looking for replacement parts for the swing. Letter I. How can I get those?
I’m looking for part numbers for replacement parts and where to order