Table of Contents
Advertisement
Distribution amplifiers
UNPACKING AND INSTALLATION
The box contains:
- Device
- Power corde
- User manual (optional)
Before use, check the contents of the box. For any deficiency report to the seller or the manufacturer
of the product.
DEVICE IS INSULATED BY PROTECTIVE WRAP AND PACKED IN A CARDBOARD BOX.
DEVICE IS SENSITIVE TO SHAKES AND DROPS. HANDLE WITH CARE DURING TRANSPORT
AND ASSEMBLY.
Check if the product is damaged during transport.
PROCEDURES FOR SAFE USE OF THE DEVICE:
1.
- Remove the protective wrap from the chassis.
- For devices that are AC 230V / 50Hz powered, the device is supplied with power cord.
- Use only power corde that comes with the device.
2.
Device is mounted in a 19" special-purpose rack cabinets designed for this type of device. Screw
device with four screws. Screws for fastening are not supplied with the device.
3.
The device must be connected to ground. A device that is not connected to the grounding does
not function properly according to factory declarations and can cause adverse effects on users and
other equipment.
4.
Strictly comply to all steps for proper connection of devices in the system.
Places for fastening
MAINTENANCE
The system maintains only person authorized by Sams elektronik
doo.
Any voluntarily opening device, upgrading or servicing is strictly
prohibited and is subject to warranty void, and the possibility of
injury.
REMOVAL AND STORAGE
1.
Before dismantling the device, switch off the power, remove
the power cord and remove all other connectors.
2.
Remove the four screws for fastening.
3.
Remove the device from rack cabinet.
4.
Wrap the machine in the foil to protect it from dust. Package
it in a box.
5.
The device must be stored in a room without moisture.
6
Sams elektronik d.o.o. • sams@sams.rs • www.sams.rs
Illustration - mounted device
elektronik
AA
Advertisement
Table of Contents
