Advertisement
Floor Polisher - Model VS12
CLEANING AND MAINTENANCE
The appliance must remain unplugged during cleaning and
maintenance work. Clean your appliance weekly, removing
dirt from the brushes with a hand held hard bristled brush
(figure 11). Remove bag 10 from cord holding hook at bag
spring 12 (figure 12). Now grasp it by bag nozzle 9, pushing
the nozzle lock to free it from the appliance (figure 8). Remove
bag closure according to figure 13, empty contents in the
garbage can or a plastic bag to avoid dust pollution in the
environment (figure 14). Once empty, reinstall the bag on the
appliance.
Remove
Install
Brush
clath pad
Fig.11
Engage
Fig.12
Disengage
5
Hold
Pull
Empty
Fig.13
Fig.14
Floor Polisher - Model VS12
GUARANTEE
VAX will guarantee the product covered by this policy under
the following conditions:
1.This policy may be invoked at any Authorized Technical
Service Shop.
2.This Guarantee shall be applicable for repair of the appliance
in case of defects caused by deficiencies of materials, parts,
components or any other fault, attributable to the manufacturer.
3.The following damages are excluded from guarantee:
damages caused by user, incorrect connection of the product
to the electrical mains, abuse, accidents happening after
delivery, ignorance and disregard of operating or maintenance
instructions and the use of improper fuel.
In case that the appliance has been damaged without
responsibility of the manufacturer or dealer, it will not be
repaired, unless the customer accepts to pay the expenses
in advance. Nevertheless, the Authorized Technical Service
Shop may, without posterior responsibility, and whenever it
deems it convenient, repair the appliance damaged under
the cited circumstances without charge, stating this situation
on the corresponding bill of delivery. The Authorized Technical
Service Shop also will do so when returning the appliance
when it exhibits no defects.
4.The term of validity shall be one year after reception of the
product by the customer.
6
Advertisement
