Advertisement
INSTALLATION STEPS
Step 1：Check all the contents are available in accordance with the above list.
Step 2：Remove the factory running board and mounting brackets.
Step 3：Install the F-mounting brackets and M-mounting brackets to the vehicle using hardware as
shown in FIG#2.
FIG#2
Step 4：Install the R-mounting brackets to the vehicle using hardware as shown in FIG#3.
FIG#3
Step 5：Install the running board to the mounting brackets using hardware as shown in FIG#1.
Step 6：Test and make sure that the running board is steadily fixed.
Step 7：Installation is finished.
INSTALLATION INSTRUCTION
RUNNINH BOARD FOR MITSUBISHI PAJERO
PART No. H126202
○
5
Page 2 of 2
○
○
○
6
7
8
○
○
○
7
8
9
NO. SMEN-H126202-WINBO(1)A1
Advertisement
