Page 1
Food Processor Model No. FP9076-GS Care & Instruction Manual For household and indoor use only Please read these instructions before use and retain for future reference Issue 2 05/08/2021...
ELECTRICAL SAFETY • You should only plug the appliance into a 220V‐240V AC, 50Hz supply. Connecting it to other power sources may damage the appliance and will invalidate the guarantee. • Switch off and unplug when not in use and before cleaning the appliance or changing accessories.
WARNING! • This appliance is intended exclusively for use in domestic households. It is not suitable for commercial use. • Always unplug the motor housing if unattended and before assembling, disassembling or cleaning. • Only use with the parts supplied and fully assembled. •...
Page 4
PARTS 1. Pusher 2. Feed tube 3. Lid 4. General purpose blade 5. Blade support 6. Bowl 7. Motor housing 8. Speed switch 9. Slicing blade 10. Shredding blade 11. Julienne blade 12. Blade holder 13. Handle IMPORTANT: Your food processor is equipped with a safety feature and will not operate unless the both the lid and the processor bowl are correctly fitted.
Page 5
ASSEMBLY 1. Clean all parts thoroughly before first use and place the motor housing on a stable, flat surface. 2. Position the processor bowl onto the motor housing and align the arrow on the base of the bowl with the ‘unlocked’ padlock symbol on the top of the motor housing.
Page 6
3. Fit the blade support onto the drive shaft in the centre of the bowl. 4. Taking care, fit the blade of choice. • If using the general purpose blade, fit this over the blade support and the blade will rest close to the bottom of the bowl.
Page 7
FOOD PROCESSOR - BASIC OPERATION 1. Assemble the food processor as described in the above section. 2. If using the general purpose blade the ingredients can be added into the bowl before fitting the lid. Advice for using the julienne, slicing and shredding blades are given in the following section.
Page 8
FOOD PROCESSOR - USING THE ACCESSORIES General purpose blade The general purpose blade is the most versatile of all the attachments and be used for chopping meats, bread and vegetables in addition to making pastry, mixing cakes and blending heavier liquids. The general purpose blade is not suitable for crushing or grinding coffee beans or converting granulated sugar to icing sugar.
Page 9
FOOD PROCESSOR - USING THE ACCESSORIES (continued) Chipping, slicing or shredding blades The blades can be used for grating, slicing or shredding hard cheese and firm vegetables such as carrots, potatoes, beetroot, onions etc. • Fit the desired blade into the blade holder. •...
Page 10
CLEANING Clean the food processor after each use. Take care when handling the blades, they are sharp and can cause personal injury. Do not clean any part of this appliance in a dishwasher 1. Switch off and unplug the appliance. 2.
TECHNICAL SPECIFICATION Cookworks Food Processor Model FP9076-GS Cat No 8469612 Rated Voltage & Frequency 220 - 240V AC 50 - 60 Hz Rated Power Input 500W Maximum work time 90 seconds Capacity 1.4 Litre Class rating II (double insulated) BS 1362 fuse...
Page 12
Argos Limited, 489-499 Avebury Boulevard, Milton Keynes, MK9 2NW. Argos (N.I.) Ltd, Forestside Shopping Centre, Upper Galwally, Belfast, United Kingdom, BT8 6FX. Argos Distributors (Ireland) Limited, Unit 7, Ashbourne Retail Park, Ballybin Road, Ashbourne, County Meath, Ireland www.argos.co.uk/cookworks Tel: 0345 640 3030 Issue 2 05/08/2021...
Need help?
Do you have a question about the FP9076-GS and is the answer not in the manual?
Questions and answers