Home Depot VISSANI HVUF11SLF Use And Care Manual page 10

□ The appliance should be maintained and cleaned frequently. For your safety, unplug the refrigerator before cleaning.
□ Interior maintenance: Clean the interior of the appliance with clean water or neutral abluent. Scour it with clean
water and wipe it with a piece of dry cloth.
□ Maintenance of door gasket: It is easy to get damaged if the door gaskets are soiled by oil, sauce, etc. so clean it
with care.
□ Outer maintenance: Wipe the dust with a piece of dry cloth, and clean it with neutral abluent if necessary.
□ Lighting and its replacement: When the refrigerating chamber door opens, the LED light turns on. When the light
is damaged, please remove the lampshade first and then replace the LED light. The specific operations are
shown in the following diagram:
1. Please move the lampshade and the thermostat out 3-5mm in the direction of the arrow.
2. Take out the lampshade and thermostat downwards.
3. Pull the connection terminal, use the screwdriver to remove the LED light board and replace it.
If the LED lamp is abnormal, it should be replaced by professionals.
Do not dismantle and replace it privately in order to avoid damage.
□ Defrosting of refrigerator will be executed automatically while the product is operating, so manual defrosting is not
required. The defrost water flows into the vaporization plate and will be vaporized by the heat of compressor. so the
drain tube must be cleaned.
Do not use mechanical devices or other means to accelerate the defrosting process.
10