Advertisement
LPTC801 – 8-CHANNEL DIMMING CONSOLE
1. Introduction
Thank you for buying the LPTC801 ! Please read the manual carefully before bringing this
device into service.
This device features 8 channels with LED indication, 8 flash buttons + 1 master flash button, a
programmable chaser, a master/slave function, a blackout function and music-controlled
operation through a built-in microphone or via an external signal.
Make sure that the device was not damaged in transit. If the device is damaged, you should
contact your dealer and postpone installation of this device.
2. Safety Instructions
Be very careful when installing the device : touching
live wires can cause life-threatening electroshocks.
Do not touch the device during operation as the housing heats up
Protect this device against rain and moisture
Unplug the supply cable before you open the housing
• A qualified technician should install and service this device.
• Damages caused by disregarding certain guidelines in this manual are not covered by the
warranty and the dealer will not accept responsibility for the ensuing defects or problems.
• do not switch the device on immediately if it has been exposed to changes in temperature.
Protect the device against damage by leaving it switched off until it has reached room
temperature.
• This device falls under protection class III.
• make sure that the available voltage does not exceed the voltage stated in the specifications
of this manual.
• Do not crimp the power cord and protect it against damage from sharp edges. Ask an
authorised dealer to replace the cord if necessary.
• Always disconnect the device from the mains when it is not in use or when you wish to clean
it. Only handle the power cord by the plug. Never pull out the plug by tugging the power cord.
• Do not look directly into the light source as sensitive people may go into epileptic seizure if
they do.
• Be aware that damages caused by user modifications to the device are not covered by the
warranty. Keep the device away from children and unauthorised users.
LPTC801
1
GB
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Lite-Puter LPTC801
Summary of Contents for Lite-Puter LPTC801
- Page 1 LPTC801 – 8-CHANNEL DIMMING CONSOLE 1. Introduction Thank you for buying the LPTC801 ! Please read the manual carefully before bringing this device into service. This device features 8 channels with LED indication, 8 flash buttons + 1 master flash button, a programmable chaser, a master/slave function, a blackout function and music-controlled operation through a built-in microphone or via an external signal.
- Page 2 Function : set the master fader on 100% and adjust the individual channels to the desired output power. Hold the PROG button for ± 1 second until the LED lights up if you want to LPTC801...
- Page 3 Connect your power packs to the sockets of output A and/or B. The music control is achieved through the built-in microphone. However, you can connect an external signal through the 6.35mm mono jack socket at the back of the device. Connecting several LPTC801’s Master/Slave Connection LPTC801...
- Page 4 By connecting two LPTC801's (see above) it is possible to make a small 8-channel 19" theatre console with 2 presets. Just screw the 2 panels together to get a 19" panel. Connect both output B sockets from the first device to the output B sockets of the second one.
- Page 5 2 x 8-pin DIN socket, 8 channels (0-10Vdc) Music Control built-in microphone or external 6.35mm mono jack socket (100mV) Dimensions 240 x 176 x 90mm Weight 1.4kg The information in this manual is subject to change without prior notice. LPTC801...
Need help?
Do you have a question about the LPTC801 and is the answer not in the manual?
Questions and answers