Advertisement
5
Power on the DivX Connected device
Power on the DivX Connected device
DivX Connected device
6
Configure the DivX Connected device
Configure the DivX Connected device
7
Using the remote control
Using the remote control
PLUGINS
PLUGINS
Connect the power cord to the device and power source
Connect the power cord to the device and power source
Turn on the TV
Turn on the TV
Turn on the device by pressing the power button
Turn on the device by pressing the power button
If you don't see the language selection screen, make sure your TV is set to display the
correct video input. The method for changing the TV inpit depends on the model, but
your TV may have an "Input" or "A/V" button on the TV or on the remote control to
select various inputs.
Follow the on-screen instructions for configuring the DivX Connected device.
First select your language from the list using the Up
the remote control. Use the Right
screen until all required items are configured. To return to a previous screen,
press the Left
Left arrow key.
• Press the Arrow buttons to move around the page or to go to the next
(Right)
(Right) or previous (Left)
• Press the Enter
• Press the Back
• Press the Menu
• Press the Setup
SERVICES
SERVICES
• The Arrow
Arrow and Enter
video playback
• Review the Navigating in Connected
information about navigating each type of media
Right arrow key to advance to the next setup
(Left) screen
Enter button to select an item
Back button to go back to the previous screen
Menu button to display additional options on a screen
Setup button to configure the device
Enter buttons also control trick modes during
Navigating in Connected section of the user guide for more
Up or Down
Down arrow keys on
Advertisement
