1. Manuals
  2. Brands
  3. Soucy Manuals
  4. Tractor Accessories
  5. S-TECH 1000X
  6. User manual

Soucy S-TECH 1000X User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SOUCY TRACK SYSTEMS USER GUIDE
S-TECH 1000X
A-8J1201-7-EN
February 2020.
Rev. A
5450 St-Roch Street, P.O. Box 400 / Drummondville (Quebec) J2B 6W3 / CANADA
Toll free: 1 877 474-6665
Fax: 819 477-9423
www.soucy-track.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S-TECH 1000X and is the answer not in the manual?

Questions and answers

Related Manuals for Soucy S-TECH 1000X

Summary of Contents for Soucy S-TECH 1000X

  • Page 1 SOUCY TRACK SYSTEMS USER GUIDE S-TECH 1000X A-8J1201-7-EN February 2020. Rev. A 5450 St-Roch Street, P.O. Box 400 / Drummondville (Quebec) J2B 6W3 / CANADA Toll free: 1 877 474-6665 Fax: 819 477-9423 www.soucy-track.com...
  • Page 2 Page Intentionally Left Blank 5450 St-Roch Street, P.O. Box 400 / Drummondville (Quebec) J2B 6W3 / CANADA Toll free: 1 877 474-6665 Fax: 819 477-9423 www.soucy-track.com...

  • Page 3: Table Of Contents

    3.1.3 SAFETY LABELS..............SECTION 4 PARTS CATALOG OF COMBINE TRACK SYSTEM S-TECH 1000X ..... . .

  • Page 4: Title Page

    SECTION 11 APPENDIX ..............SOUCY TRACK SYSTEMS USER GUIDE...

  • Page 5: Section 1 Load & Speed Rating And Track System Specifications

    SYSTEM TO LUBRICATE THE TRACK AND WHEELS. • REDUCE SPEED AND LOAD ON CROWNED ROADS TO PREVENT UNEVEN TRACK WEAR. • CLEAN UP MUD AND RESIDUE BUILD-UPS ON THE CHASSIS ON A REGULAR BASIS. INCREASE FREQUENCY IN STICKY WET SOILS. SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...
  • Page 6 SHARP TURNS OR USING BRAKES DURING TURNS MAY CAUSE ADDITIONAL STRESS ON MACHINE COMPONENTS AND SHOULD BE AVOIDED. NOTE *Maximum payload for road travel duration ≤ 1 hour. For longer duration, reduce speed and/or load. SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...
  • Page 7 MAKE SURE THERE IS ENOUGH CLEARANCE BETWEEN SYSTEM AND VEHICLE TO AVOID INTERFERENCES. 1. To increase clearance between track and combine harvester: a. Axle extension are available from OEM dealer. NOTE • All dimensions are in millimeters and (inches) SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...
  • Page 8 Figure 1.1 S-TECH 1000X front view measurements ITEM DESCRIPTION DIMENSION WITH OEM AXLE EXTENSION 400mm (MAY VARY) SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...
  • Page 9 Figure 1.2 S-TECH 1000X Side view measurements SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...
  • Page 10 Page Intentionally Left Blank SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...

  • Page 11: Section 2 Introduction

    • Right-hand and left-hand sides are determined by facing in the direction of forward travel. • This equipment shall be used for agricultural operations only. Contact Soucy Track if you wish to use it for other purposes. • Driving the combine harvester over agrarian land using agricultural rubber tracks ensures that the surface of the farmland is protected from significant degradation.

  • Page 12: System Description

    Figure 2.1 Track System Description ITEM DESCRIPTION TRACK MAIN FRAME MAIN AXLE HALF SPROCKET MID ROLLER BOGIE FRONT SUB FRAME REAR SUB FRAME IDLER WHEEL SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...

  • Page 13: Serial Number And Identification

    • DEALER: PLEASE COMPLETE THE TRACK SYSTEM REGISTRATION FORM ON LAST PAGE AND RETURN TO SOUCY TRACK TECHNICAL SERVICE DEPARTMENT Figure 2.2 Nameplate and serial numbers NOTE The serial number with “R” and “L” indicates on which side (RH or LH) the system must be mounted. The model number is now indicated.
  • Page 14 Page Intentionally Left Blank SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...

  • Page 15: Section 3 Safety

    3.1 GENERAL NOTICE THIS SECTION APPLIES TO ALL SOUCY TRACK SYSTEMS. CAUTION ONLY QUALIFIED PERSONNEL ARE ALLOWED TO INSTALL, USE AND MAINTAIN ANY SOUCY TRACK SYSTEM. • Keep this manual in the cabin while using the Soucy Track System. •...

  • Page 16: Safety Signs Used In This Guide

    Check that safety labels are intact and visible. Replace damaged or illegible labels. • Read the user guide of your Soucy Track System before installing and operating your system. • Make sure the OEM fire extinguisher is ready to use.
  • Page 17 BROKEN OR MISSING HARDWARE. WARNING HEAVY PARTS CAN CAUSE INJURIES. TWO PEOPLE ARE REQUIRED FOR ASSEMBLY AND REMOVAL OF THE SOUCY TRACK SYSTEM. USE A JACK, A FORKLIFT OR A HOIST TO HANDLE THE SYSTEM AND SUB-ASSEMBLIES. WARNING DO NOT USE TRACKS AND WHEELS AT THE SAME TIME ON A TRACTOR. THE SIMULTANEOUS USE OF TRACKS AND WHEELS COULD SEVERELY AFFECT HANDLING AND LEAD TO LOSS OF CONTROL, POSSIBLY RESULTING IN SERIOUS INJURIES OR DEATH.
  • Page 18 MAKE SURE NO ONE STANDS IN THE VEHICLE DANGER ZONE WHILE IT IS MOVING. PAY SPECIAL ATTENTION TO THE AREA BEHIND THE TRACTOR AS DEBRIS AND/OR BROKEN STUDS MAY COME OUT WITH GREAT FORCE AND CAUSE MAJOR INJURIES. SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...
  • Page 19 3.1.2 DANGER ALWAYS RELEASE THE PRESSURE WHEN DISASSEMBLING ANY HYDRAULIC CYLINDER. NOT RELEASING THE PRESSURE MAY LEAD THE CYLINDER TO EJECT WITH GREAT FORCE AND CAUSE MAJOR INJURIES OR DEATH. Figure 3.2 SAMPLE CYLINDERS SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...

  • Page 20: Safety Labels

    Check for possible interference between the tracks and various accessories used with a tractor, such as implements, ballast weights and others. • Due to the numerous accessories that can be used with tractors, Soucy Track cannot guarantee that there will be no interference. 3.1.3 SAFETY LABELS •...

  • Page 21: Section 4 Parts Catalog Of Combine Track System S-Tech 1000X

    SECTION 4 PARTS CATALOG OF COMBINE TRACK SYSTEM S-TECH 1000X 4.1 EXPLODED VIEW OF THE TRACK SYSTEM Figure 4.1 EXPLODED VIEW OF THE TRACK SYSTEM ITEM PART # QTY DESCRIPTION 8032014-1000-7 LEFT MODULE S-TECH 1000 ASS'Y 8032014-2000-7 RIGHT MODULE S-TECH 1000 ASS'Y...

  • Page 22: Parts List Of The Left Module

    4.2 PARTS LIST OF THE LEFT MODULE Figure 4.2 PARTS LIST OF THE LEFT MODULE (8032014-1000-7) SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...
  • Page 23 FUL. TH. HEX.B. 10.9 M24-3.00X80 HEX.B. 10.9 M24-3.00X110 SM240-110-100F01-0015 SM240-140-100F01-0022 HEX.B. 10.9 M24-3.00X140 SM240-150-100F01-0022 HEX.B. 10.9 M24-3.00X150 SM240-180-111F01-0015 FUL. TH HEX.B. 10.9 M24-3.00X180 SMR20-213730-50701-0021 FLAT WASHER M20 21X37X3 SMR22-233930-50701-0021 FLAT WASHER M22 23X39X3 SMR24-254440-50401-0014 FLAT WASHER M24 25X44X4 SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...

  • Page 24: Parts List Of The Right Module

    4.3 PARTS LIST OF THE RIGHT MODULE Figure 4.3 PARTS LIST OF THE RIGHT MODULE (8032014-2000-7) SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...
  • Page 25 REAR IDLER AXLE 8034021-2000-1 MID ROLLER BOGIE 8035011-0020-2 HYDRAULIC GREASE TENSIONER 8035011-0025-1 HYDRAULIC FILLING SYSTEM 3/8'' CART-0064-7–EN SOUCY TRACK SYSTEMS USER GUIDE S-TECH1000X ETSI-00130 FRAME STICKER ETSI-00170 HEAVY LOAD STICKER PLAQUE-SIGNAL-CE CE NAMEPLATE S351D-10F04-100 STAINLESS STEEL DRIVE SCREW 10 GA X 1/2" LG S4111-M240S-021 HEX.

  • Page 26: Parts List Of The Main Axle Assembly

    4.4 PARTS LIST OF THE MAIN AXLE ASSEMBLY Figure 4.4 PARTS LIST OF THE MAIN AXLE ASSEMBLY (8032014-0030-2) SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...
  • Page 27 S6701-00001-000 O-RING I.D 2.063 X 2.25 O.D S6701-00066-000 O-RING 6.25 ID X 6.75 OD S6702-00006-000 JOINT V-RING I.D. 235-265 X 20 S6723-00009-000 CASSETTE SEALS TYP3, ID 210 - OD 240 - TH 18 mm. SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...

  • Page 28: Parts List Of The Front Sub Frame Assembly

    4.5 PARTS LIST OF THE FRONT SUB FRAME ASSEMBLY Figure 4.5 PARTS LIST OF THE FRONT SUB FRAME ASSEMBLY (8032014-0335-1) ITEM PART # QTY DESCRIPTION 8032014-0050-1 FRONT SUB FRAME 8032014-0107-1 PIVOT AXLE 8032014-0370-1 TRACK TENSIONER BOGIE PIN SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...

  • Page 29: Parts List Of The Rear Sub Frame Assembly

    4.6 PARTS LIST OF THE REAR SUB FRAME ASSEMBLY Figure 4.6 PARTS LIST OF THE REAR SUB FRAME ASSEMBLY (8032014-0460-1) ITEM PART # QTY DESCRIPTION 8032014-0080-1 REAR SUB FRAME 8032014-0107-1 PIVOT AXLE SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...

  • Page 30: Parts List Of The Fiber Bushing Assembly

    4.7 PARTS LIST OF THE FIBER BUSHING ASSEMBLY Figure 4.7 PARTS LIST OF THE FIBER BUSHING ASSEMBLY (8032014-0530-1) ITEM PART # QTY DESCRIPTION 8032014-0106-1 4 HOLES AXLE HOUSING CB4856-056-GM GAR-MAX BUSHING 3.0 X 3.5 X 3.54 S6711-00008-000 RADIAL SEAL(R.WIPER AU/STEEL)3.0X3.5X.312 SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...

  • Page 31: Parts List Of The Tensioner Assembly

    INT. RETAINING RING 140MM B.OXY. (D1300-1400) S6483-00004-000 SAE ORB-6 HEX SOCKET PLUG S6731-44002-000 M.F SEAL 111MM X 128MM X 22MM SM700-000-410Z01-0001 AXIAL SHAFT NUT KM14 (M70X2) SM700-708515-50601-0001 EXT.TOOTH LK WASH. MB14 (M70 70X85X1.5) SPT-0015–1 MECANICAL SEAL PRESSING TOOL SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...

  • Page 32: Parts List Of The Rear Idler Bogie

    INT. RETAINING RING 140MM B.OXY. (D1300-1400) S6483-00004-000 SAE ORB-6 HEX SOCKET PLUG S6731-44002-000 M.F SEAL 111MM X 128MM X 22MM SM700-000-410Z01-0001 AXIAL SHAFT NUT KM14 (M70X2) SM700-708515-50601-0001 EXT.TOOTH LK WASH. MB14 (M70 70X85X1.5) SPT-0015–1 MECANICAL SEAL PRESSING TOOL SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...

  • Page 33: Parts List Of The Mid Roller Bogie

    IN. RETAINING RING 140MM B.OXY. (D1300-1400) S6483-00004-000 SAE ORB-6 HEX SOCKET PLUG S6731-44002-000 M.F SEAL 111MM X 128MM X 22MM SM700-000-410Z01-0001 AXIAL SHAFT NUT KM14 (M70X2) SM700-708515-50601-0001 EXT. TOOTH LK WASH. MB14 (M70 70X85X1.5) SPT-0015–1 MECANICAL SEAL PRESSING TOOL SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...

  • Page 34: Parts List Of The Mid Roller Bogie

    IN. RETAINING RING 140MM B.OXY. (D1300-1400) S6483-00004-000 SAE ORB-6 HEX SOCKET PLUG S6731-44002-000 M.F SEAL 111MM X 128MM X 22MM SM700-000-410Z01-0001 AXIAL SHAFT NUT KM14 (M70X2) SM700-708515-50601-0001 EXT. TOOTH LK WASH. MB14 (M70 70X85X1.5) SPT-0015–1 MECANICAL SEAL PRESSING TOOL SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...

  • Page 35: Parts List Of The Hydraulic System Assembly

    QTY DESCRIPTION EDS-091516-M01-05 SHORT PROTECTIVE CAP SKK20-7/16UNF-EE-GAS-C6F NITROGEN FILL FITTING MS15003-1 HYDRAULIC GREASE LUBRICATOR 1/8" - NPT 10861777 BLEEDER VALVE 12295294 CHECK VALVE 1/4" - NPT BS400028 BS SEAL 1.090 X 1.520 X 0.09 SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...

  • Page 36: Parts List Of The Hydraulic System Assembly

    QTY DESCRIPTION EDS-091516-M01-05 SHORT PROTECTIVE CAP BS400028 BS SEAL 1.090 X 1.520 X 0.09 SKK20-7/16UNF-EE-GAS-C6F NITROGEN FILL FITTING 3009-3 DUST CAP 3010-3-230 QUICK COUPLER 10861777 BLEEDING VALVE Figure 4.14 HYDRAULIC FILLING ASSEMBLY (8035011-0025-1) OR (SPT-0020–1) SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...

  • Page 37: Section 5 Preparation

    Use a sander to remove paint on parts that are in contact. If you leave the paint on the parts, the gap can cause vibration and loosening of attaching hardware. NOTICE DO NOT USE A GRINDER TO REMOVE THE PAINT. SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...
  • Page 38 WHEN MANIPULATING THE TRACK SYSTEM WITH A FORKLIFT, MAKE SURE THE DISTANCE BETWEEN FORKS ARE SETTED PROPERLY AND MAKE SURE THAT THE TWO SPROCKET HOLES (A) ARE ALIGNED WITH THE FORK HOLES SEE FIGURE: Figure 5.1 Distance between forks (Forklift) SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...

  • Page 39: Section 6 Track System Installation Procedure

    1. Raise the vehicle until the wheels leave the ground and stabilize it with jacks. Refer to the manual of the vehicle user to position the jacks safely. 2. Remove wheel as indicated in combine owner's manual. SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...
  • Page 40 Type of bolt / stud 11'' (279 mm) M22-1.5 Figure 6.1 ADAPTOR KIT (8033056–1012–1) ITEM PART # QTY DESCRIPTION 8033056-1002-1 M22 NUT THREADED 11" PILOT METRE ADAPTOR S4538-M2200-001 NORD-LOCK (SHUR-LOCK) M22, 7/8 SM222-110-100F01-0022 HEX.B. 10.9 M22-1.50X110 SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...
  • Page 41 Figure 6.2 ADAPTOR KIT (8033056–1013–1) ITEM PART # DESCRIPTION 8033056-1001-1 M22 NUT 11" PILOT METRE ADAPTOR S1231-22060-0G2 HEX. BOLT CL10.9 ZINC PLATED M22X 1.5 X60 (DIN 960) S4538-M2200-001 NORD-LOCK (SHUR-LOCK) M22, 7/8 S1231-22140-0GA HEX.B. 12.9 M22-1.50X140 SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...
  • Page 42 Apply anti-seize compound on the face of the adaptor in contact with the combine hub. 5. Install track system (1) on the combine flange (B) with OEM bolts (C) or nuts and washers. 6. Refer to the combine owner manual for bolts torque. SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...
  • Page 43 7. Install the axle bolts of the cleared section. SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...
  • Page 44 8. Rotate the axle of 180 degrees manually while keeping the combine lifted and the forks still in the opening of the main frame. SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...
  • Page 45 9. Install other axle bolts of the cleared section. 10. Refer to the combine owner manual for bolts torque. SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...

  • Page 46: Hydraulic Loading Sequence

    6.2 HYDRAULIC LOADING SEQUENCE DANGER ALWAYS RELEASE THE PRESSURE WHEN DISASSEMBLING ANY HYDRAULIC CYLINDER. NOT RELEASING THE PRESSURE MAY LEAD THE CYLINDER TO COME OUT WITH GREAT FORCE AND CAUSE MAJOR INJURIES. Figure 6.3 SAMPLE CYLINDER SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...
  • Page 47 7. Repeat previous steps for the opposite side. 8. When all systems are adjusted to the right pressure, check each hydraulic module to ensure there are no leakage. 9. Verify the hydraulic grease level of both modules if necessary. SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...

  • Page 48: Tracking Procedure

    ALL LOAD AND SPEED USED DURING THE TRACK ALIGNMENT MUST BE WITHIN THE SPECIFICATION OF THE “LOAD AND SPEED RATING” IN THE SECTION 1. • THE TRACK ADJUSTMENT MUST BE DONE EVERYTIME TRACK ROTATION IS DONE. SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...

  • Page 49: Track Alignment Short Procedure

    4. If the temperature difference between the hottest inward lugs and the hottest outward lugs is more than 10⁰ C (50⁰ F) and the maximum temperature of 80⁰ C (176⁰ F), proceed to 6.6 TRACK ALIGNMENT PROCEDURE, then repeat the previous steps again with a temperature difference of 20⁰ C (68⁰ F) instead. SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...

  • Page 50: Track Alignment Long Procedure

    4. If the temperature difference between the hottest inward lugs and the hottest outward lugs is more than 30⁰ C (86⁰ F) and the maximum temperature of 80⁰ C (176⁰ F), proceed to 6.6 TRACK ALIGNMENT PROCEDURE, then go back to 6.4 TRACK ALIGNMENT SHORT PROCEDURE. SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...

  • Page 51: Track Alignment Procedure

    To add toe-out, loosen the adjustment screw (D) by 1 full turn and tight the rear adjustment screw (C) by 1 full turn. 3. Tighten 16 x M24 screws (A, B) on the top and bottom main axle according to the TRACK ALIGNMENT PROCEDURE (NOTICE). SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...
  • Page 52 Page Intentionally Left Blank SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...

  • Page 53: Section 7 Maintenance

    • Every time you change the track. • Every time you change the vehicle • Always use Soucy Track approved spare parts and lubricants when you maintain your Track System. Table 7.1 Consequences of wrong tension TENSION SIGNS CONSEQUENCES Too loose Ratcheting.

  • Page 54: Wheels Oil Verification

    1. If after a few check the lack of oil is always present. The seal should be inspected and replaced as necessary. 2. Use JDM J20C grade oil with the following properties: a. Soucy uses Hy-Gard Hydraulic / Transmission oil b. Kinematic Viscosity of 9.1cSt @100⁰C Pour point of -36⁰C...

  • Page 55: Wheels Oil Change

    1. Raise the combine slightly to help aligning the wheels. 2. Align the drain plug downwards. 3. Remove drain plug (1) with allen key. 4. Drain oil in the bucket. 5. Repeat previous steps for all wheels. SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...
  • Page 56 6. Align the drain plug upwards and remove them. 7. Fill the wheel with oil. 8. Put back plug (1) with allen key. 9. Repeat previous steps for all wheels. SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...

  • Page 57: Main Axle Oil Verification

    1. If after a few checks the lack of oil is always present. The seal should be inspected and replaced as necessary. 2. Use 80W90 grade oil with the following properties: a. Soucy uses GL5 GEAR LUBE 80W90 JOHN DEERE. b. Flash point of greater or equal to 180 ⁰C.

  • Page 58: Main Axle Oil Change

    IF YOU HAVE TO REMOVE THE AXLE HUB CAP, CHANGE THE X SEAL BEFORE REINSTALLING THE CAP. 1. Remove 2x drain plugs (1) and upper drain plug (2). 2. Drain oil in the bucket. 3. Repeat previous steps for the other side. SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...
  • Page 59 4. Re-Install 2x bottom drain plug (1). 5. Fill the main axle of oil through the upper hole of the drain plugs (2). SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...
  • Page 60 6. Wait five minutes for the oil to settle before checking if the quantity is adequate (A). Full level is aprox. 0.63''(16mm) under the center of the main axle. 7. Repeat previous steps for the other side. SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...

  • Page 61: Lubricating Points

    7.6 LUBRICATING POINTS NOTICE SOUCY TRACK RECOMMENDS LUBRICATING THE TENSIONER SYSTEM ON BOTH SIDE AT THE END OF EACH SEASON TO PREVENT SEIZING Figure 7.1 LUBRICATING POINTS 7.7 CLEANING AND STORAGE • Clean the Track System daily or more frequently (according to type of operation) to prevent accumulation or packing of debris.

  • Page 62: Long-Term Storage Conditions

    Do not store the Track System in closed areas with electric devices that generate ozone (such as motors), or with petrol chemicals or petrol chemical vapors. • The Track System is flammable. Proper fire suppression equipment is required. SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...

  • Page 63: Section 8 Operation

    The system is designed to run on agricultural land surfaces. Do not drive on hard surfaces (paved roads) and/or at high speed for extended periods. • Contact your Soucy Track dealer if you have questions about operating your Track System. SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...

  • Page 64: Track Rotation

    The combination of higher speeds and heavy loads, as well as uneven road conditions, may lead to track overheating and perhaps premature damage to rubber tracks, wheels and other components. • To avoid this kind of inconvenience, Soucy Track recommends adjusting your speed on long distance trips, hot pavement or uneven road surface. •...

  • Page 65: Section 9 Warranty Policy And Procedure

    This warranty policy applies to the following products only: Soucy Track Systems from Soucy International Inc. This document is a guide explaining the warranty’s limited conditions for the agricultural track system and winter trail groomer. Please note that Soucy International Inc. retains the right to make a final decision regarding repair or replacement of parts.

  • Page 66: Exclusion

    For any loss of earnings, or loss of use of an equipment part, caused by a mechanical failure; • When Soucy International Inc. is not informed by the client or authorized agent of any defect or failure within a reasonable time or during the warranty period (please refer to the "TERMS" section for more information);...

  • Page 67: Terms

    2. Only claims made by an agent authorized by Soucy International Inc. during the coverage period will be considered for warranty purposes; 3. The Claim Form of Soucy Track must be duly completed and handed in with a proof of purchase for the Soucy Track System;...
  • Page 68 Page Intentionally Left Blank SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...

  • Page 69: Section 10 Replacement Program For Rubber Tracks

    Rubber tracks from Soucy International Inc. benefit from a prorated replacement warranty program. • Soucy rubber track used for agricultural and winter-trail grooming purposes: prorated replacement coverage of up to twenty-four (24) months or two thousand (2000) hours of operation, whichever comes first, based on the end user...

  • Page 70: Other Conditions

    Repeat the measurement at 3 locations along the length of the track. d. Record each of the dimensions on a sketch of the track. SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...

  • Page 71: Section 11 Appendix

    10,9 12,9 Bolt Ø (mm) Thread Coarse Fine Coarse Fine Coarse Fine Coarse Fine Coarse Fine Ptich 2,00 1,50 2,50 1,50 2,50 1,50 2,50 1,50 3,00 1,50 (mm) Class Tightening Torque (ft-lb) 10,9 12,9 SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...
  • Page 72 Tightening Torque Nm 10,9 Bolt Ø (mm) Class Tightening Torque (ft-lb) 10,9 NOTE • Applicable to new lubricated, new unlubricated and used lubricated bolts. • Torque indicated on drawing is always prevailing. Torque Tolerance ± 5% SOUCY TRACK SYSTEMS USER GUIDE A-8J1201-7-EN...
  • Page 73 In order to prevent any transcription and/or transmission error during registration process, We recommend using the electronic copy of this form available on the Soucy Track Data Center at: http://datacenter.soucy-track.com. Note that you must be a Soucy Track dealer to apply for a free access to this Web site TRACK SYSTEM REGISTRATION FORM Fill out the following fields and return to Soucy Track Technical Service Department at service.soucy-track@soucy-...

Table of Contents