nedis WIFICDP30WT Quick Start Manual page 5

Rechargeable video doorbell charged by usb or by wire
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Main parts (image A)
Light sensor
1
Bracket
2
Lens
3
Micro USB port
4
PIR sensor
5
Microphone
6
Status indicator LED
7
Doorbell button
8
Speaker
9
Safety instructions
-
WARNING
• Ensure you have fully read and understood the instructions in this document
before you install or use the product. Keep this document for future
reference.
• Only use the product as described in this document.
• Disconnect the product from the power source and other equipment if
problems occur.
• Do not use the product if a part is damaged or defective. Replace a damaged
or defective product immediately.
• Do not drop the product and avoid bumping.
• Do not expose cells or batteries to heat or fire. Avoid storage in direct
sunlight.
• This product may only be serviced by a qualified technician for maintenance
to reduce the risk of electric shock.
• Do not short-circuit a cell or a battery.
• Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that
can damage the surface.
• After extended periods of storage, it may be necessary to charge and
discharge rechargeable cells or batteries several times to obtain maximum
performance.
• Unplug the product from the power source and other equipment if problems
occur.
• Do not expose the product to water or moisture.
• Do not unplug the product by pulling on the cable. Always grasp the plug
and pull.
Micro USB cable
q
MicroSD card slot
w
Power switch
e
Reset button
r
External power input
t
Reset pin
y
Screwdriver
u
Screw (4x)
i
Plug (4x)
o
5

Advertisement

Table of Contents
loading

Table of Contents