Advertisement
Operator manual
Maredo® GT 230
REV. 051 HiSpeed-Corer
SERIAL #:
IMPORTANT NOTE:
The required (hydraulic) power depends on the working depth, soil
conditions, working speed etc. The condition of the triplex greensmower
and the ambient temperature determine the available capacity. Everybody
should check the greensmower during work if it isn't overloaded by
checking the heat built up and take the correct measurements.
MAREDO DOES NOT TAKE ANY LIABILITY FOR
GREENSMOWER DAMAGES.
MAX. ENGINE REVS : 75% OF MAXIMUM
MAX GROUND SPEED: 4 KMH/ 2.5 MPH
Note:
For a safe operation it is essential, that the operator reads and
understands the manual of the Maredo head and the triplex
machine.
MAREDO BV, RIJKSSTRAATWEG 16, 3956 CR LEERSUM, THE NETHERLANDS
WWW.MAREDO-BV.COM.
EN 1911
1
Advertisement
Table of Contents
Related Manuals for MAREDO GT 230
Summary of Contents for MAREDO GT 230
- Page 1 MAX GROUND SPEED: 4 KMH/ 2.5 MPH Note: For a safe operation it is essential, that the operator reads and understands the manual of the Maredo head and the triplex machine. MAREDO BV, RIJKSSTRAATWEG 16, 3956 CR LEERSUM, THE NETHERLANDS WWW.MAREDO-BV.COM.
- Page 2 10. Use only original MAREDO spare parts, in order to ensure the safe operation of the machine. 11. Never use the MAREDO in the dark, in heavy rains, on frozen grounds, stony conditions and/ or on slopes steeper than 30 degrees.
- Page 3 We, MAREDO, Rijksstraatweg16, 3956 CR Leersum, The Netherlands, hereby declare fully on our authority, that the product: MAREDO GT 230, with serial number as indicated on the machine and written on this manual, to which this declaration applies, has been manufactured in line with NEN-EN –ISO 14121-1:2007, according to the...
- Page 6 17. The opening of the hollow tines should face to the rear of the machine, otherwise the hole edge will get damaged. 18. CHECK THE (HYDRAULIC) DRIVE OF THE GREENSMOWER REGULARLY. DO NOT OVERHEAT THE (HYDRAULIC) DRIVE. MAREDO IS NOT RESPONSIBLE FOR DAMAGES TO THE GREENSMOWER.
- Page 7 Make sure you mount them in exact the same position as before (do not mirror them). Next, a parts kit is needed to mount the head to your triplex greensmower. Maredo has several kits available. Each kit comes with its own mounting instructions and parts-list. MAINTENANCE...
- Page 8 The bottom scraper plate is split in 3 sections. If we work with one and position it in the centre of the triplex wheel behind, we can make longer passes. The cores will be divided and laid down aside the wheel. We can make long passes without the wheel squeezing the cores anymore.
Need help?
Do you have a question about the GT 230 and is the answer not in the manual?
Questions and answers