Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Reflex Storatherm Aqua Compact AC 60/1-W
Summary of Contents for Reflex Storatherm Aqua Compact AC 60/1-W
- Page 1 20.01.2015 Rev.1 Storatherm Aqua Compact With heat exchanger: AC 60/1-W, AC 110/1-W, AC 160/1-W With electric heating element: AC 60/E-W, AC 110/E-W, AC 160/E-W With electric heating element and heat exchanger: AC 60/1E-W, AC 110/1E-W, AC 160/1E-W Operating manual Original operating manual...
-
Page 3: Table Of Contents
Contents English Storatherm Aqua Compact 20.01.2015 Rev.1 Contents Notes on the operating manual ..........................5 Liability and guarantee ..............................5 Safety .................................... 6 Explanation of symbols ..............................6 3.1.1 Symbols and notes used ..........................6 3.1.2 Safety symbols used ............................6 Personnel requirements .............................. - Page 4 Contents 10.1 Reflex Customer Service ..............................19 10.2 EC Declaration of conformity ............................19 10.3 Guarantee..................................19 4 — English Storatherm Aqua Compact — 20.01.2015 Rev.1...
-
Page 5: Notes On The Operating Manual
Reflex Winkelmann GmbH accepts no liability for any damage resulting from failure to observe the information in this operating manual. In addition to the requirements set out in this operating manual, national statutory regulations and provisions in the country of installation must also be complied with (concerning accident prevention, environment protection, safe and professional work practices, etc.). -
Page 6: Safety
Safety Safety Explanation of symbols 3.1.1 Symbols and notes used The following symbols are used in this operating manual. Danger • Danger to life and/or severe damage to health – The corresponding warning symbol in combination with the "Danger" signal term indicates an imminent threatening danger which will result in death or severe (irreversible) injuries. -
Page 7: Personnel Requirements
Safety Personnel requirements Only specialist personnel or specifically trained personnel may install and operate the equipment. The electric connections and the wiring of the device must be executed by a specialist in accordance with all applicable national and local regulations. Personal protective equipment Use the prescribed personal protective equipment as required (e.g. -
Page 8: Description Of The Device
Description of the device Description of the device Regulations Concerning the installation and operation of the device, the following standards, regulations and directives have to be complied with: - DIN EN 806 / DIN EN 1717 / DIN 1988 / DIN 4708 / EN 12975 - DVGW Worksheet W 551 / Worksheet W 553 (German Technical and Scientific Association for Gas and Water) - EnEG (German energy saving act) - EnEV (German ordinance on energy-saving thermal protection and energy-saving plant technology in the case of buildings) -
Page 9: Design And Connection Dimensions
Description of the device Design and connection dimensions Temperature controller – Setting range: 7 °C - 85 °C Reset switch – Switch to restart after temperature safety shut-down. – Restart of the temperature controller after a temperature shut-down > 110 °C Pilot light Indicator for the electric heater operation. -
Page 10: Identification
Description of the device Identification 4.5.1 Nameplate The nameplate provides information on manufacturer, year of manufacture, part number and technical data. The nameplate can be found on the right side of the storage tank. Information on nameplate Meaning Hot water tank, enamelled acc. to DIN 4753 Type Device name Serial No. -
Page 11: Technical Data
Technical data Technical data AC110/1- AC160/1- AC60/1E- AC110/1E AC160/1E AC60/E- AC110/E- AC160/E- Type AC60/1-W Nominal capacity Diameter External 461 x 461 dimensions Height 1065 1492 1065 1492 1065 1492 Height of wall 1225 1225 1225 fastening Weight Connection point size for drinking water Cold water 3/4"... -
Page 12: Installation
Installation Installation Danger – electric shock! • Risk of serious injury or death due to electric shock. – Ensure that the system is voltage-free before installing the device. – Ensure that the system is secured and cannot be reactivated by other persons. –... -
Page 13: Connection On "Water" Side
Installation 6.1.4 Connection on "water" side Make the connection to the cold-water pipe in accordance with DIN 1988, using suitable individual fittings or a complete safety assembly. Attention! – Contact corrosion at the connections Plastic inserts in the connection may be damaged during welding work. •... -
Page 14: Hydraulic Connection
Installation 6.3.1 Hydraulic connection Attention! – Equipment damage Install the supplied flow pipe as required by the connection position to ensure proper functioning. Note! Use blind plugs to close all unused connections. – Ensure that all connections are sufficiently sealed by the blind plugs. –... -
Page 15: Drinking-Water Expansion Vessel
6.3.2 Drinking-water expansion vessel Install a Reflex expansion vessel in the colt water pipe between storage and safety assembly. Each time water is drawn, drinking water must flow through the expansion vessel. The table below serves as a guide concerning the design of the expansion vessel. Sizes can differ, depending on the net capacities of the individual makes of the vessels. -
Page 16: Terminal Diagram
Installation 6.4.1 Terminal diagram 400 V terminal plan 230 V terminal plan 16 — English Storatherm Aqua Compact — 20.01.2015 Rev.1... -
Page 17: Commissioning
Commissioning Commissioning Checking the requirements for commissioning The device will be ready for commissioning when the tasks described in the "Installation" chapter have been completed. The system designer or an assigned expert is responsible for carrying out the commissioning. Commission the storage tank according to the information in the corresponding installation manual. -
Page 18: Maintenance
Maintenance Reset switch Switch to restart after temperature safety shut-down. Restart of the temperature controller after a temperature shut-down > 110 °C Maintenance Caution – risk of burning! • Risk of burning due to escaping medium. – Maintain a sufficient distance from the escaping medium. –... -
Page 19: Annex
Annex Annex 10.1 Reflex Customer Service Central customer service Central telephone number: +49 (0)2382 7069 - 0 Customer Service extension: +49 (0)2382 7069 - 9505 Fax: +49 (0)2382 7069 - 9588 E-mail: service@reflex.de Technical Hotline For questions about our products... - Page 20 Reflex Winkelmann GmbH Gersteinstraße 19 59227 Ahlen, Germany Telephone: +49 (0)2382 7069-0 Fax: +49 (0)2382 7069-9588 www.reflex.de...
Need help?
Do you have a question about the Storatherm Aqua Compact AC 60/1-W and is the answer not in the manual?
Questions and answers