Workstation plug-in for agilent masshunter workstation software (11 pages)
Summary of Contents for Teledyne SDC10
Page 1
Teledyne Ltd. All drawings, technical content and the intellectual property associated with this manual is property of Teledyne Ltd. No content should be copied or distributed in any way without the express permission of the company.
1 – Introduction 1 Introduction The Surface Display Computer (SDC) is a topside user interface for Teledyne TSS’s range of subsea cable and pipeline detection systems. It is a touch screen panel PC that can be operated from its portable transit case or mounted in a 19” rack, and provides a selection of standard and legacy interfaces for communicating with the subsea installation, as well as coming pre-installed with Teledyne TSS’s proprietary DeepView for Windows software.
Notify Teledyne Limited immediately if there are parts or sub-assemblies missing from your shipment. If you see any damage to the system, file a claim with the insurers and inform Teledyne Limited. The title page of this manual lists the contact details for Teledyne Limited. Teledyne Limited also operates a 24-hour emergency telephone support line managed by trained and experienced technicians.
NOTE Throughout this manual any references to the SDC refer to the SDC10. Earlier versions may not support the same feature set. Although the SDC uses solid state electronics, the hard-disk drive and parts of the display panel are susceptible to damage through shock or sustained vibration.
SDC to a separate user-supplied data logger. You should use a data logger to record the survey measurements acquired by the SDC10. COM5 is used by the SDC to communicate with the video overlay card. This port is not availa- ❐...
SDC and the subsea installation. NOTE Not all Teledyne TSS detection products support current-loop communication. Check the user manual for the system to confirm. If you intend to use current-loop communication you will need to reconfigure the SDC and the SEP to use this com- munication method.
(COM3) is hard-wired to the analogue PCB input via a bespoke cable loom. This cable should not be removed or modified without contacting Teledyne Limited. If the external output is disabled via DeepView, the analogue output will not provide any outputs.
3 – Operating Software 3 Operating Software NOTE The DeepView for Windows software application is used with all Teledyne TSS detection systems. The SDC has DeepView for Windows pre-installed and configured to start automatically when it is powered on. The SDC is not provided with a keyboard or mouse as it has a touch-screen display. A short-cut to a software keyboard is provided that can be used to select commands and options from within DeepView for Windows.
1. Shut down the SDC. 2. Remove the USB port dust cover caps on the front of the panel PC and attach the SDC10 recovery USB drive and a USB keyboard. 3. Hold down the F11 key on the keyboard and switch on the SDC. If the unit does not restart...
‘My Computer’ and the respective drive for your USB port. Within the contents of the USB pen drive you will find the setup program which automatically installs the software. 3. To use DeepView for Windows, double click on the Teledyne logo icon that the installation pro- gramme places on your Windows 7 desktop.
4 – System Specifications 4 System Specifications Along with a detailed specification of the SDC10 and its major assemblies, this section of the manual also includes examples to show the measurement performance that the system can deliver under ideal operating conditions.