Table of Contents
Advertisement
Condition
The printing is blurred.
The color deviation appears on
the print.
The halftone representation is
coarse.
The area around characters or
the layer areas appear uneven.
Solution
Confirm that the paper set (size, shape, and type) matches the
paper (size, shape, and type) configured by the application
software or printer driver.
Clean the print head.
（→
dried or clogged if the printer has not been used for a long time.
If you are using the printer at low temperature
is 14 degrees Celsius (57 degrees Fahrenheit) or lower) :
Open the [Utility] tab in the printer driver and then select the [Low
Temperature Print Mode] in the [Special Settings].
Confirm that the paper set (size, shape, and type) matches the
paper (size, shape, and type) configured by the application
software or printer driver.
Adjust the position of the print head.
Set the resolution to [Input resolution 1200dpi] (prioritize image
quality) and then print.
（→
Open the [Color] tab of the printer driver, and set the [Half-tone]
to [Error Diffusion].
P.70
（→
Open the [Utility] tab in the printer driver and then select the
[Prevent Unevenness] in the [Special Settings].
Open the [Color] tab of the printer driver, and set the [Half-tone]
to [Error Diffusion].
P.70
（→
Confirm that the paper set (size, shape, and type) matches the
paper (size, shape, and type) configured by the application
software or printer driver.
For Troubleshooting Operations
P.126
The print head may become
）
Room temperature
（
P.129
（→
）
P.69
）
）
（→
）
P.105
（→
）
P.105
）
175
Advertisement
Table of Contents
Troubleshooting
