Set Up The Projector - NEC SX10000 User Manual

Set up the projector

1. Turn on the projector
2. Select your type of projection:
Desktop front, ceiling rear, desktop rear, and ceiling front.
3. Display the test pattern by pressing the TEST button on the re-
mote control or using the menu.
TEST
4. Adjust the image position and the image size.
(1) Press and hold the CTL button and press the POSITION button to display
the Lens Shift adjustment screen.
Use the Select button on the remote control or the LENS SHIFT button on
the projector cabinet to move the image horizontally and vertically.
To close the Lens Shift adjustment screen, press the CANCEL button.
See page E-9 for "Lens Shift Adjustable Range".
POSI/
LENS
CTL
ENTER
(2) Press and hold the CTL and press the ZOOM + or - button to adjust the
image size optically. You can also adjust the image size by using the ZOOM
+ or - button on the projector cabinet.
The zoom function processes a signal digitally. For this reason, the zoom
buttons on the remote control and the projector cabinet are not available
for HDTV, Video, S-Video, and SDI signals.
CTL
(3) Press and hold the CTL button and press the FOCUS + or - button to
obtain the best focus optically. You can also adjust the focus by using the
FOCUS + or - button on the projector cabinet.
CTL
E – 13
+
FOCUS MAGNIFY/ ZOOM
-
+ +
MAGNIFY/
FOCUS ZOOM
- -
+
-