Table of Contents
Advertisement
Advanced HoloLens Controls in Web Interface
Accessing Web Interface
Connecting to WiFi
In order to access the HoloLens web interface, the user must tether the device to a computer
using a WiFi connection. Ensure that both devices (HoloLens and the computer) are connected
to the same WiFi network and that network credentials are entered if required. For instructions
on connecting the HoloLens device to WiFi, refer to the section
Locating IP Address
1. From the HoloLens start menu, launch and pin the 'Settings' application:
2. Select the 'Networking & Internet' button to open the device's network settings:
C onnecting to WiFi
.
Advertisement
Table of Contents
