Components; Applicable Equipment - Sanyo MCO-420MA Instruction Manual

COMPONENTS

< Front side >
1. 4-20mA output terminal
Outputs 4-20mA current for O
2. Span adjustment volumes
Adjusts the output current for O
3. 0-100mV input and power supply connector
Connector for connecting MCO-420MA with a product from which analog data is acquired.
Note: Connecting cable between a product and this connector is enclosed.

APPLICABLE EQUIPMENT

The interface board MCO-420MA is applicable to equipment listed below:
CO incubator
2
MCO-20AIC (But, O
MCO-18AIC (But, O
MCO-18M
MCO-5AC (But, O
MCO-5M
MCO-80IC (But, O
MCO-19AIC (But, O
1
, CO and Temperature data.
2 2
, CO and Temperature data, respectively.
2 2
cannot be output.)
2
cannot be output.)
2
cannot be output.)
2
cannot be output.)
2
cannot be output.)
2
5
< Back side >
2
3