Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for Digital Juice Orbit Dolly FlexTrac
Summary of Contents for Digital Juice Orbit Dolly FlexTrac
- Page 1 USER’S GUIDE...
- Page 2 User’s GUide Package Congratulations on your purchase of the Digital Juice Orbit Dolly FlexTrac & Wheel System. Please check your package to make Contents sure it includes the following components: 1 50' section of track (1) 2 single-swivel wheel assemblies (2)
- Page 3 About the The Digital Juice Orbit Dolly FlexTrac is a highly portable, seamless and flexible track system designed for use with the Digital Orbit Dolly Juice Orbit Dolly. The product includes a 50' roll of flexible but solid FlexTrac &...
- Page 4 User’s GUide About the The Digital Juice Orbit Dolly FlexTrac and Wheel System includes a handy storage and carry case (5) that makes it simple and convenient Orbit Dolly to bring your FlexTrac with you on location. This deluxe carry bag FlexTrac &...
- Page 5 Laying Out 1) Unroll the FlexTrac and lay it into position for the desired path, placing the two single cord track runs approximately 30 inches The FlexTrac apart. (Use the provided 50 ' track curved at one end to form the For Use With second run of track or use two 50 ' lengths of track laid in parallel.) The Orbit Dolly...
- Page 6 User’s GUide Common 1) Straight Path: When using a single piece of cord, bend the FlexTrac in the middle and lay the two track runs out evenly at about 30 inches Track Setups apart for a dolly run of approximately 20-22' (Figure 6a). When adding the optional second 50' cord, lay both lengths of cord out parallel to one another for a full 50' track (Figure 6b).
- Page 7 Common Figure 9 Track Setups (continued) Track cenTer 5) Spiral Path: Lay the FlexTrac out in a spiral configuration such that the two ends are about 5 feet apart with one loop between them. Place the floating pivot arm wheel on the inside track of the spiral (Figure 10).
- Page 8 Can I use my Orbit Dolly FlexTrac in the grass? A: The FlexTrac rubber cord is not designed to be laid on surfaces that are not somewhat level and smooth.
Need help?
Do you have a question about the Orbit Dolly FlexTrac and is the answer not in the manual?
Questions and answers