1. Manuals
  2. Brands
  3. Zator Manuals
  4. Computer Hardware
  5. LMZ08
  6. User and maintenance manual

Zator LMZ08 User And Maintenance Manual

Microprocessor control
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
LMZ08
MICROPROCESSOR CONTROL
USER AND MAINTENANCE
MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Zator LMZ08

Summary of Contents for Zator LMZ08

  • Page 1 LMZ08 MICROPROCESSOR CONTROL USER AND MAINTENANCE MANUAL...
  • Page 2 ZATOR SRL Via Galvani, 11 20095 Cusano Milanino (MI) Italy Tel. +39 02 66403235 Fax +39 02 66403215 info@zator.it www.zator.it User and maintenance manual LMZ08_v03 OCTOBER 2018...
  • Page 3 Declarati on of Conformity (All. IIA DIR. 2006/42/CE) Manufacturer: ZATOR Srl Via Galvani 11 20095 Cusano Milanino (MI) Italy Tel.+39 02 66403235 Fax +39 02 66403215 Email: info@zator.it DECLARES Under its responsibility that the Microprocessor control: Model Touch Panel Control...
  • Page 4 INDEX GENERAL INFORMATION Introducti on Warranty Warranty restricti ons Maintenance service request Spare parts request SAFETY NORMS - CONFORMITY OF USE Safety and environment general informati ons P.P.E. Personal protecti ve equipment Risks, protecti ons, warnings and cauti ons 2.3.1 General safety 2.3.2 Dangers and risks unavoidable...

  • Page 5: Table Of Contents

    5.1.5 Turning on/off the valves 5.1.6 Glue patt erns programming for dots valves type 5.1.6.1 No.1 glue patt ern programming - Enable glue patt ern 5.1.6.2 Add a glue patt ern 5.1.6.3 Edit a glue patt ern 5.1.6.4 Programming examples 5.1.7 Glue patt erns programming for line valves type 5.1.7.1 No.1 glue patt ern programming - Enable glue patt ern...
  • Page 6 INDEX SETUP MENU 12.1 Version 12.2 Mode Memory (only for ENCODER mode) 12.3 Window (only for PACKAGING e PACKAGING 2 version) 12.4 12.5 No. of glue patt erns programmable Encoder rati o (only for ENCODER mode) 12.6 Conversion from dots glue to line glue (only for ENCODER mode) 12.7 12.8 Language selecti on...
  • Page 9 USER AND MAINTENANCE MANUAL MICROPROCESSOR CONTROL LMZ08...
  • Page 10 Instructi ons, drawings and documentati on contained in this manual are of reserved technical dispositi on, only for Zator Srl property and may be not reproduced in any way, neither in full or parti ally reproducti on; not translated into another language, or transmitt ed in any electronic or mechanical means or form, without writt en permission of Zator Srl.
  • Page 11 The fl awed parts under warranty are fi xed or replaced free from Zator Srl in the ti me compati bly necessary, understood that the Zator Srl is exempted from each responsibility for any ti tle, while the buyer give up to ask damages or costs, including those resulti ng from the temporary not use of the purchased machinery for all the ti me is necessary to put it back in effi...
  • Page 12 • The packaging is intact • The exact correspondence of the commissioned material In case of damages or wrong delivery contact immediately Zator Srl. The buyer, on penalty of warranty decadence, must report in writi ng the fl aw conformity or fault of the microprocessor control to the seller, specifying in detail the nature, within eight days from their discovery.
  • Page 13 The disassembly and assembly operati ons must be performed according to the manufacturer’s instructi ons. Contact the Technical Offi ce of Zator Srl which will give to you the specifi cati ons to do the request of the parts and will provide the informati on about their replacement.
  • Page 14 The LMZ08 control is designed and manufactured in compliance with the current safety standard. Only trained personnel is authorized to install and use the control. For the LMZ08 control are provided only and exclusively the applicati on fi elds describe in this manual. All data and parameters indicated in this manual must be respected.
  • Page 15 Directi ves 89/656/CEE and 89/686/CEE and to the actual laws in the country. Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...
  • Page 16 A person is trained when it is informed by a competent person about the acti viti es it must perform and the risks relati ve to improper behaviour and, if necessary, it has received the required training. Also a trained person must be informed about the safety devices and protecti ve measures. MICROPROCESSOR CONTROL LMZ08...
  • Page 17 In case of improper maintenance of the hydraulic system parts. E - Risk of fi re Prohibiti on to smoke and/or to be present objects at temperature near the microprocessor control. Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...
  • Page 18 CE norms signage: examples of danger symbols Corrosive Combusti ve Easily fl ammable Extremely agent fl ammable Irritati ng Dangerous for the Noxious Toxic environment Danger Noxious material High voltage MICROPROCESSOR CONTROL LMZ08...
  • Page 19 - special or toxic - noxious waste from industrial and hand-craft ed producti ons. Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...
  • Page 20 The customer is responsible for ensuring an appropriate lighti ng of the local where the machine is installed, according to the laws in force in your country and the EU directi ves. Vibrati ons The microprocessor control doesn’t make vibrati ons. MICROPROCESSOR CONTROL LMZ08...
  • Page 21 Secti on 2 - SAFETY NORMS - CONFORMITY OF USE Installati on - General norms Zator’s products are manufactured in compliance with the laws in force during its constructi on. The personnel will be trained and qualifi ed to take advantage of the installed machinery requirements.
  • Page 22 TECHNICAL DESCRIPTION Instrument functi ons The LMZ08 microprocessor control has been designed and realized for the use on various kind of producti on machines operati ng at high speed. Its design and versati lity make it ideal whenever a producti on process requires that manufactured products need precision applicati ons of cold glues by means of programmable glue valves.
  • Page 23 The simple and intuiti ve design of graphical interface, combined with a touch panel display with diff erent languages (where messages are displayed on the various menus), simplify programming and learning of the basic functi ons instrument. Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...
  • Page 24 Max power for each channel 25 W Proporti onal valve Type 0÷20 mA Aux output (Nr.1) Glue level Shutt er Aux1 Aux2 25 poles multi -connector for valves Switching voltage 24 Vdc Max current 0,5 A Data connecti on Ethernet plug MICROPROCESSOR CONTROL LMZ08...
  • Page 25 Frontal protecti on IP 65 Zator reserves right to change, without noti ce, the informati on provided in this user manual. Informati on, pictures and descripti ons contained in this publicati on are for guidance only and not binding the Manufacturer.
  • Page 26 0-20 mA Flap Reset input Level in Level sensor input Level out Level sensor output Free auxiliary Opt 1 Opt 2 Level output Nameplate (Serial number - Model) Fuse Power plug Ethernet plug Power butt on I/0 holder MICROPROCESSOR CONTROL LMZ08...
  • Page 27 (only for COLLATOR version) PHOTOCELL SIGNAL VALVE OFF VALVE ON GLUE DISPENSING IN PROGRESS TEST SETUP VALVES PRESSURE PROGRAMS MENU COMPENSATION (only for ENCODER mode) Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...
  • Page 28 (PACKAGING and PACKAGING 2 version) GLUE GLUE PATTERNS No. 5-8 PATTERNS No. 5-8 (COLLATOR version) (PACKAGING and PACKAGING 2 version) NEXT PAGE PREVIOUS PAGE TAPE ROLLER (only for GLUE PATTERNS No. 5-8 ENABLED) (only for GLUE PATTERNS No. 5-8 ENABLED) MICROPROCESSOR CONTROL LMZ08...
  • Page 29 FREQUENCY (dots/second) TEST MODE (only for DOTS TEST) VALVE TEST ON DOTS TEST LINE TEST SELECTION BUTTON SELECTION BUTTONS VALVE TEST OFF DISABLED ENABLED Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...
  • Page 30 EDIT CONVERSION FROM DOTS EDIT ENCODER RATIO GLUE TO LINE GLUE No. OF GLUE PATTERNS SOFTWARE (INFORMATION) LANGUAGE SELECTION PROGRAMMABLE SOFTWARE MENU SOFTWARE VERSION HARDWARE CODE OF PREVIOUS PAGE INSTALLED INTERFACE CARD LANGUAGE SELECTION MENU SELECT DESIRED LANGUAGE PREVIOUS PAGE MICROPROCESSOR CONTROL LMZ08...
  • Page 31 (correct CODE and USER No.) VOLTAGE (%) PEACK TIME (ms) VALVE No. DOTS GLUE SIZE AMPERE LIMIT (A) LOGOUT - EXIT (only for dots valves type) Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...
  • Page 32 PROGRAM VIEW MENU START GLUE PATTERN GLUE PATTERN No. VALVE No. SPACE BETWEEN GLUE DOTS OPEN PROGRAM SCROLL UP PROGRAMS (-1) (only for dots valve type) NEXT PAGE END GLUE PATTERN SCROLL DOWN PROGRAMS (+1) PREVIOUS PAGE MICROPROCESSOR CONTROL LMZ08...
  • Page 33 SPEED 1 / PRESSURE 1 DISPENSING GLUE SPEED 2 / SPEED 3 / SPEED 4 / SPEED/PRESSURE DIAGRAM PRESSURE 2 PRESSURE 3 PRESSURE 4 Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...
  • Page 34 USER AND MAINTENANCE MANUAL QUERTY KEYBOARD UPPER-CASE QUERTY KEYBOARD LOWER-CASE QUERTY KEYBOARD CLOSE WINDOW / BACKSPACE CANCEL CHANGES ENTER / CHANGES SPACE BAR UPPER-CASE ACTIVATED CONFIRMATION LEFT ARROW RIGHT ARROW LOWER-CASE ACTIVATED MICROPROCESSOR CONTROL LMZ08...
  • Page 35 (for integer value) (for decimal value) CLOSE WINDOW / BACKSPACE CANCEL CHANGES ENTER / CHANGES VALUE SETTABLE LIMITS CONFIRMATION (LOWER LIMIT and UPPER LIMIT) Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...
  • Page 36 2. Aft er you press the power butt on, from the front panel the power presence signal light turns on. 4B. Power presence signal light: the light turns on when you push the power butt on Light OFF - Instrument OFF Light ON - Instrument ON MICROPROCESSOR CONTROL LMZ08...
  • Page 37 LMZ08 m/min WINDOW PACKAGING PROGRAM NAME #1234 The touch-sensiti ve area is included in the display dimension. Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...
  • Page 38 Through the menu bar you can go in the diff erent main menu of the instrument. When you tap on the relati ve icon, the selected icon lights up blue, so it indicates the present displayed screen. MICROPROCESSOR CONTROL LMZ08...
  • Page 39 2. Depending on the selected parameters, it appears on screen the numeric keypad (for integer values) or decimal numeric keypad (for decimal values); 4E. Numeric keypad for integer values 4F. Numeric keypad for decimal values Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...
  • Page 40 124. Values sett able limits Lower limit Upper limit (from-to) Current set value 4. Then insert your desired value using the number (ex. 20). The system overwrite last value with the new value; MICROPROCESSOR CONTROL LMZ08...
  • Page 41 6b. Or tap ESC to exit from the changes and exit from the window; window and cancel the changes; 7. The new value of parameter is showed into the data box. Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...
  • Page 42 The packaging version programming has to be used in case of single boxes, separated from each other. Likewise, the packaging2 version programming has to be used when the single separated boxes are very close to each other. Applicati on example of packaging version Applicati on example of packaging2 version MICROPROCESSOR CONTROL LMZ08...
  • Page 43 Sett able values: from 0 to 9999 mm LMZ08 LMZ08 m/min WINDOW m/min WINDOW PACKAGING PACKAGING 9999 3. In the home screen the changed value of the parameter is updated. Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...
  • Page 44 • glue patt erns programmable (dots or lines) and relati ve distances; • tape roller and tape work directi on; • valve and start sensor (photocell) and relati ve off set distance; • copy valve program butt on. MICROPROCESSOR CONTROL LMZ08...
  • Page 45 Space: distance between dots in the patt ern (mm) End: fi nal distance of single glue patt ern (mm) End: fi nal distance of single glue patt ern (mm) Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...
  • Page 46 To determinate the correct dots/line glue patt ern positi on (therefore their distances) the measures have to be calculated from the beginning of the box (which can be defi ned as the origin) where the start sensor (photocell) detect it. Start sensor Start sensor detecti on point (photocell) Valve (origin) MICROPROCESSOR CONTROL LMZ08...

  • Page 47: Turning On/Off The Valves

    Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...

  • Page 48: Glue Patt Erns Programming For Dots Valves Type

    Then tap of the No.1 LMZ08 ator Srl 2. With the on screen numeric keypad insert/modify data (ex. 10 mm), then tap enter to confi rm; Sett able values: from 0 to 9999 mm LMZ08 ator Srl 9999 MICROPROCESSOR CONTROL LMZ08...
  • Page 49 5C: Example of a dots glue patt ern with 5D: Example of a line glue patt ern with space between dots equal to 5 mm space between dots equal to 0 mm Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...
  • Page 50 5. With the on screen numeric keypad insert/modify data (ex. 30 mm), then tap enter to confi rm; Sett able values: from 0 to 9999 mm LMZ08 ator Srl 9999 MICROPROCESSOR CONTROL LMZ08...
  • Page 51 For the dots glue patt ern programming: of the No.1 glue patt ern space parameter; 7b. Tap 7b. Tap of the No.1 glue patt ern LMZ08 ator Srl Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...
  • Page 52 9b. Once you have confi rmed the data, the No.1 glue patt ern will be changed in a dots glue patt ern. The glue patt ern programming is completed. LMZ08 ator Srl 30. Dots glue patt ern enabled MICROPROCESSOR CONTROL LMZ08...

  • Page 53: Add A Glue Patt Ern

    SPACE 1 > SPACE 2 SPACE 2 To convert from dots glue patt ern to line glue patt ern, set the space parameter to zero. Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...

  • Page 54: Programming Examples

    USER AND MAINTENANCE MANUAL 5.1.6.4 Programming examples Example No.1: Two dots glue patt erns programming with dots valve type LMZ08 ator Srl MICROPROCESSOR CONTROL LMZ08...
  • Page 55 Secti on 5 - VALVES PROGRAMMING - ENCODER MODE Example No.2: Two line glue patt erns programming with dots valve type LMZ08 ator Srl Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...

  • Page 56: Glue Patt Erns Programming For Line Valves Type

    No.1 glue patt ern LMZ08 ator Srl 2. With the on screen numeric keypad insert/modify data (ex. 10 mm), then tap enter to confi rm; Sett able values: from 0 to 9999 mm LMZ08 ator Srl 9999 MICROPROCESSOR CONTROL LMZ08...
  • Page 57 *NOTE: If the glue patt ern end parameter is left with a value equal to zero, the instrument will control the valve that dispensing a conti nuous glue line patt ern, overlooking the start sensor signal. Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...
  • Page 58 5. With the on screen numeric keypad insert/modify data (ex. 30 mm), then tap enter to confi rm; Sett able values: from 0 to 9999 mm LMZ08 ator Srl 9999 6. Once you have confi rmed the data, the No.1 line glue patt ern programming is completed. LMZ08 ator Srl MICROPROCESSOR CONTROL LMZ08...

  • Page 59: Add A Glue Patt Ern

    To modify and/or correct the positi on of a glue patt ern, tap the data box relati ve to glue patt ern start or end parameters desired. With the on screen numeric keypad modify data, then tap enter to confi rm. Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...

  • Page 60: Programming Examples

    USER AND MAINTENANCE MANUAL 5.1.7.4 Programming examples Example No.1: One line glue patt ern programming with line valve type LMZ08 ator Srl MICROPROCESSOR CONTROL LMZ08...
  • Page 61 Secti on 5 - VALVES PROGRAMMING - ENCODER MODE Example No.2: Two line glue patt erns programming with line valve type LMZ08 ator Srl Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...

  • Page 62: Programming Menu With 8 Glue Patt Erns

    5E: No.1-4 glue patt erns LMZ08 ator Srl programming menu for dots valves type with No.5-8 glue patt erns enabled 5F: No.1-4 glue patt erns LMZ08 ator Srl programming menu for line valves type with No.5-8 glue patt erns enabled MICROPROCESSOR CONTROL LMZ08...
  • Page 63 No.2 with their parameters equal to zero), the instrument will ignore automati cally the following glue patt erns aft er No.1 even if they have been programmed. Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...

  • Page 64: Copy Valves Menu

    3. With the on screen numeric keypad insert/modify the desti nati on valve number where you want to copy the glue patt erns data of the source valve program* (ex. Valve No.3), then tap enter to confi rm the data; Sett able values: from 1 to 8 MICROPROCESSOR CONTROL LMZ08...
  • Page 65 7. To go back to the previous screen tap to go to home screen. or tap or tap or tap to go to to go to Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...

  • Page 66: Programs Menu

    90. Scroll down (displayed screen) programs (+1) From this menu it’s possible to: • display the saved and free glue patt erns programs; • write/edit the programs name (opti onal); • insert new program; • load saved program. MICROPROCESSOR CONTROL LMZ08...

  • Page 67: Insert New Program/Load Saved Program

    *NOTE: Scroll up/down the programs doesn’t involve any changes in the instrument. The program earlier loaded remains in the memory during these acti ons unti l won’t be loaded another program. Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...
  • Page 68 4a. Wait the loading process of the data unti l the icon the loading process of the data unti l the icon disappears; disappears; PROGRAMS MENU LMZ08 3b. Otherwise, to cancel the operati on tap the operati on tap MICROPROCESSOR CONTROL LMZ08...

  • Page 69: Write/Modify Program Name

    2. Then tap on the text box to display the uppercase QWERTY to display the keyboard; 92. Text box PROGRAMS MENU LMZ08 PROGRAMS MENU LMZ08 112. Uppercase QWERTY keyboard Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...
  • Page 70 20 characters (include lett ers, numbers and symbols); PROGRAMS MENU LMZ08 PROGRAM NAME #1234 4. To switch to lower-case QWERTY keyboard tap PROGRAMS MENU LMZ08 PROGRAM NAME #1234 113. Lower-case QWERTY keyboard “ & 5. To switch back to upper-case QWERTY keyboard tap MICROPROCESSOR CONTROL LMZ08...
  • Page 71 10a.Then the program name will displayed near the program number in the menu where expected; 9b. Or tap 9b. Or tap to exit from the keyboard and cancel the changes. Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...

  • Page 72: Display A Program

    4 glue patt erns 72. Valve No. 96. Start glue patt ern 97. Space between glue dots (only for dots valves type) 98. End glue patt ern 100. Next page 90. Scroll down 99. Open programs (+1) programs MICROPROCESSOR CONTROL LMZ08...
  • Page 73 7D-7E 7D: Program view menu LMZ08 ator Srl NOME PROGRAMMA #1234 with 4 glue patt erns, guns 5-8 101. Previous page Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...
  • Page 74 Sett able values: from 1 to 50 programs *NOTE: Scroll up/down the programs doesn’t involve any changes in the instrument. The program earlier loaded remains in the memory during these acti ons unti l won’t be loaded another program. MICROPROCESSOR CONTROL LMZ08...
  • Page 75 To load the program is necessary follow the instructi ons in the secti on 7.1 - Insert new program/ load saved program. LMZ08 ator Srl PROGRAM NAME #1234 PROGRAMS MENU LMZ08 PROGRAM NAME #5678 Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...

  • Page 76: Valves Menu

    Normally these data don’t need to be changed, but if it’s necessary these changes must be performed by AUTHORIZED PERSONNEL. Every data changes made wrongly may cause malfuncti oning of the equipment. MICROPROCESSOR CONTROL LMZ08...

  • Page 77: Change The Valve Type

    2a. By drop-down menu it’s possible to select one of 5 types of diff erent valves (standard or made by ZATOR producti on). To assign a new type of valve tap on your desired type (ex. “●●● Dot”); STANDARD VALVE...
  • Page 78 Tap OK to cancel changes automati cally aft er 10 confi rm; seconds; Please Confirm Please Confirm 4a. The new type of valve is upgraded under its relati ve valve icon. VALVES Gun type change is upgraded MICROPROCESSOR CONTROL LMZ08...

  • Page 79: Change Manually The Valves Parameters (Only For Encoder Mode)

    It’s advised in all cases to contact the company before doing any changes. To modify manually the parameters of the desired standard valves is necessary to login into the valve setup menu. These changes can’t be made for the Zator producti on valves. 8.2.1 Login...
  • Page 80 79. LOGIN enabled User number and access code have been entered correctly. Tap the butt on to login. 5b. Aft er you have logged in, you will enter into the valve setup menu (see following secti on). VALVE MICROPROCESSOR CONTROL LMZ08...

  • Page 81: Gun Setup Menu

    3. Once you have fi nished the changes, to exit and logout tap To access again into the valve setup menu it will be necessary log in another ti me (see secti on 8.2.1 - Login). Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...

  • Page 82: Compensation Menu

    Normally these data don’t need to be changed, but if it’s necessary these changes must be performed by AUTHORIZED PERSONNEL. Every data changes made wrongly may cause malfuncti oning of the equipment. MICROPROCESSOR CONTROL LMZ08...
  • Page 83 (usually these values are similar but someti mes they may be diff erent). Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...

  • Page 84: Pressure Menu (Only For Encoder Mode)

    Normally these data don’t need to be changed, but if it’s necessary these changes must be performed by AUTHORIZED PERSONNEL. Every data changes made wrongly may cause malfuncti oning of the equipment. MICROPROCESSOR CONTROL LMZ08...
  • Page 85 • MINIMUM SPEED: from 0 to 300 m/min • SPEED 1,2,3,4: from 0 to 800 m/min • PRESSURE 1,2,3,4: from 0 to 100 % Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...

  • Page 86: Test Menu

    11A: Test menu TEST LMZ08 ator Srl 57. Valve test OFF 50. Frequency (dots/second) (only for DOTS TEST mode) 12. Test menu 51. Test mode 52. Dots test 55. Selecti on 53. Line test (displayed screen) butt ons enabled MICROPROCESSOR CONTROL LMZ08...

  • Page 87: Dots Test Mode

    (ex. Gun No.1). To start the test you must acti vate at least one valve; TEST LMZ08 11B: Dots test mode ator Srl Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...
  • Page 88 7. It’s possible to turn on/turn off the desired valves also during the test running; 8. To end the test just turn off all the valves that are sti ll acti ve, or alternati vely you can change the displayed screen from the menu bar. MICROPROCESSOR CONTROL LMZ08...

  • Page 89: Line Test Mode

    TEST LMZ08 11C: Line test mode ator Srl In the line test mode the frequency parameter is disabled Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...
  • Page 90 6. It’s possible to turn on/turn off the desired valves also during the test running; 7. To end the test just turn off all the valves that are sti ll acti ve, or alternati vely you can change the displayed screen from the menu bar. MICROPROCESSOR CONTROL LMZ08...
  • Page 91 Every data changes made wrongly may cause damages to the valves. It’s advised in all cases to contact the company before doing any changes. Security code 9822 Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...
  • Page 92 • PACKAGING: single boxes separated from each other; • PACKAGING 2: single boxes separated from each other but very close to them; • COLLATOR: conti nuous applicati on, not from single boxes, but for example from a coil. MICROPROCESSOR CONTROL LMZ08...
  • Page 93 *NOTE: If the glue patt erns No. 5-6-7-8 just have been enabled and they have been programmed for one or more valves, if later they will be disabled, they will also remain in memory without being erased. Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...
  • Page 94 2. With the on screen numeric keypad insert/modify the desired data, then tap enter to confi rm. Sett able values: from 0 to 999 m/min If the value is sett ed to zero, the functi on is disabled. MICROPROCESSOR CONTROL LMZ08...
  • Page 95 Srl ITALIANO ROMÂNĂ POLSKI TÜRK ITALIANO ROMÂNĂ POLSKI TÜRK ENGLISH ENGLISH DEUTSCH DEUTSCH DEUTSCH 4. To go back to the previous page tap Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...
  • Page 96 46. Previous page references 01. Home screen 2. To go back to the previous page tap to go back to the home screen. or tap or tap or tap to go back to the to go back to the MICROPROCESSOR CONTROL LMZ08...
  • Page 97 START (PHOTOCELL SENSOR) SIGNAL REMOTE CHANNEL (VALVE) TEST SIGNAL ENCODER +24 V +24 V 0-20mA 0-20 mA RESET + 24 V GLUE LEVEL INPUT +24 V Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...
  • Page 98 USER AND MAINTENANCE MANUAL + 24 V GLUE LEVEL OUTPUT + 24 V FLAP AUX OUTPUTS (SLIDE) 6 - 2 = +24V 7 - 3 = OPT 1 6 - 4 = OPT 2 MULTI-CONNECTION FOR GUNS MICROPROCESSOR CONTROL LMZ08...
  • Page 99 To access to power plug fuses, from the rear panel remove the fuses holder from its slot placed above the power plug. Then replace the damaged fuses and insert the fuses holder in its slot. Fuses holder No. 2 fuses 6,3 AT Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...
  • Page 100 Holder fuse for No. 1 fi se F1,25 A 3. Remove the fuse holder from its slot and replace the damaged fuse; 4. Insert the fuse holder in its slot and reassemble the top cover with the screws. MICROPROCESSOR CONTROL LMZ08...
  • Page 101 Secti on 14 - CIRCUIT DIAGRAM CIRCUIT DIAGRAM Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...
  • Page 102 Check if the installati on and the positi on of the encoder is ok Check if the LED of considered channel lights up Missing valve drive from the rear panel of the instrument Check the conditi ons of the valves/encoder/start Damaged cables sensor cables MICROPROCESSOR CONTROL LMZ08...
  • Page 103 Secti on 16 - DIMENSIONS DIMENSIONS Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...
  • Page 104 ......................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................Zator Srl Via Galvani 11 - 20095 - Cusano Milanino (MI) - Italy www.zator.it - info@zator.it...
  • Page 106 ZATOR SRL Via Galvani, 11 20095 Cusano Milanino (MI) Italy Tel. +39 02 66403235 Fax +39 02 66403215 info@zator.it www.zator.it...

Table of Contents