Advertisement
Quick Links
Operation Manual
Waste Water Pump
62820, 62821
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Related Manuals for XPOtool 62820
Summary of Contents for XPOtool 62820
- Page 1 Operation Manual Waste Water Pump 62820, 62821 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
- Page 2 To allow for a smooth execution of your complaint or return, it is important to contact our customer service team before returning the goods. Returns Department WilTec Wildanger Technik GmbH Königsbenden 28 52249 Eschweiler E-mail: service@wiltec.info Tel: +49 2403 55592–0 Fax: +49 2403 55592–15 https://www.XPOtool.com Item 62820, 62821 Page 2 The Tool Experts 01 2022-1...
- Page 3 The waste water pump must be protected from frost and from running dry. • The pump must be supplied via a residual current circuit breaker (RCD) with a rated fault oper- ating current of no more than 30 mA. https://www.XPOtool.com Item 62820, 62821 Page 3 The Tool Experts 01 2022-1...
- Page 4 230 V~50 Hz safety socket. Make sure that the device is in perfect condition. Insert the plug into the socket and the pump is ready for operation. https://www.XPOtool.com Item 62820, 62821 Page 4 The Tool Experts 01 2022-1...
- Page 5 2. Remove the suction strainer from the pump housing. 3. Clean the impeller with clean water. Important! Do not place the pump on the impeller. 4. Reassemble the pump in reverse order. https://www.XPOtool.com Item 62820, 62821 Page 5 The Tool Experts 01 2022-1...
-
Page 6: Troubleshooting
Water too hot; thermal switch Make sure that the maximum wa- stops pump ter temperature does not exceed 35 ℃. https://www.XPOtool.com Item 62820, 62821 Page 6 The Tool Experts 01 2022-1... - Page 7 Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH. https://www.XPOtool.com Item 62820, 62821 Page 7 The Tool Experts 01 2022-1...