Operation - Jinbei TR-Q7II Manual

1. Press and hold the power button for
about 2 seconds to start the trans-
mitter.
2. Set the radio mode on your transmit-
ter according to the camera you are
using: Canon
Sony / Fuji
Lumix . This is done via the corre-
sponding sub-item in the menu.
3. Set the same channel and flash group on both your flash and
transmitter.
Note: The flashes using the same channel can be set separately in
different groups depending on their mode and flash output. 4.
4. Press the Test Trigger Button [5] to ensure that the flashes are
synchronised with the transmitter.
5. Press the respective group button [4] to set the different modes (M/
TTL).
6. Press the sync button [9] to switch between the different sync
modes: first shutter curtain sync, second shutter curtain sync and
high-speed sync.

Operation

/ Nikon /
/ Olympus /
36