Mitsubishi LVP-XD10U Operating Manual page 2

Mitsubishi operating guide data projector lvp-xd10u, lvp-sd10u
Table of Contents

Advertisement

COPYRIGHT
Copyright © 2001 by this company. All rights reserved. No part of this publication may be reproduced,
transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in
any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without
the prior written permission of this company.
DISCLAIMER
This company makes no representations or warranties, either expressed or implied, with respect to the
contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose.
Further, this company reserves the right to revise this publication and to make changes from time to time in the
contents hereof without obligation of this company to notify any person of such revision or changes.
WARNING
Use the attached specified power supply cord. If you use another power-supply cord, it may cause interference
with radio and television reception.
Use the attached VGA cable or serial mouse cable with this equipment so as to keep interference within the
limit of a FCC Class B device.
This apparatus must be grounded.
COMPLIANCE NOTICE
This Data Projector complies with the requirements of the EC Directive 89/336/EEC "EMC Directive" as
amended by Directive 93/68/EEC and 73/23/EEC "Low Voltage Directive" as amended by Directive 93/68/
EEC.
The electro-magnetic susceptibility has been chosen at a level that gains proper operation in residential areas,
on business and light industrial premises and on small-scale enterprises, inside as well as outside of the
buildings. All places of operation are characterized by their connection to the public low voltage power supply
system.
WARNING
USE THE ATTACHED VGA CABLE OR SERIAL MOUSE CABLE WITH THIS EQUIPMENT SO AS TO
KEEP INTERFERENCE WITHIN THE LIMITS OF A EN55022 CLASS B AND EN55013. PLEASE
FOLLOW WARNINGS INSTRUCTIONS.
CAUTION
TO PREVENT SHOCK, DO NOT OPEN THE CABINET. NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. AND PLEASE READ ALL
OF THESE INSTRUCTIONS BEFORE YOU OPERATE YOUR PROJECTOR. SAVE THESE
INSTRUCTIONS FOR FUTURE REFERENCE .
WARNING
TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE, DO NOT USE
THIS UNITS GROUNDED PLUG WITH AN EXTENSION CORE OR IN AN OUTLET UNLESS ALL THREE
PRONGS CAN BE FULLY INSERTED.
For PLUGGABLE EQUIPMENT. The socket-outlet shall be installed near the equipment and shall be
accessible.
Do not stand the projector. It may fall and cause serious injury and damage to the projector.
II
English

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sd10uXd10uLvp-sd10u

Table of Contents