Mitsubishi LVP-XD10U Operating Manual page 16

2. "PLEASE CHANGE A NEW LAMP. THE POWER WILL TURN OFF AFTER 20 HOURS" will be displayed
on the screen if the lamp has been operated for 980 hours. The "20" will count down (see figure 16).
3. "PLEASE CHANGE A NEW LAMP" will blink on the screen together with a green LED if the lamp has been
operated for more than 1000 hours (see figure 17). The power will turn off automatically after 15 seconds.
All three of the above messages will not display for more than 15 seconds, but each message will be
displayed whenever you turn on the lamp.
Figure 16 Lamp replacement warning signal
2. Lamp is not well attached
If the LED blinks rapidly, it indicates that the lamp is not attached properly.
3. Temperature is too high
If the projector's internal temperature is too hot to operate safely, the LED will blink slowly
for one minute and then the lamp will turn off automatically.
4. Normal status
If the LED light is off, it means the lamp and temperature inside the projector are normal.
Caution
The lamp indicator will light when the lamp becomes too hot. Turn off the power and let
the projector cool for 45 minutes, then turn it on again. If the indicator is still shining,
contact your dealer.
12 English
Figure 15 Lamp replacement warning signal
Figure 17 Lamp replacement warning signal