Advertisement
BHS 2000 Quick Guide
To turn Chime mode off, [Cancel], otherwise it will turn off automatically when the system is turned
on.
For more information on this topic please visit the complete
Reset
To reset the system after an alarm event, first enter your [security code].
Then, to view the event, press the [Options] button until the display shows [Alarm Memory, Enter
Code] + your [security code].
Security Codes
Your system allows up to 6 different security codes for use by other users.
To add a user code, press the [Options] button until the display window shows [Auxiliary Code,
Enter Master Code].
Enter your [Master Security Code].
Select the desired number to assign. The window will then show [Enter New Code].
Enter the new user's code.
The keypad will audibly confirm that the system accepted the new code.
To delete a user code, press the [Options] button until the display window shows [Auxiliary Code,
Enter Master Code].
Enter your [Master Security Code]. The window shows [Enter 1-6].
Enter the user number you would like to delete.
The display will show [Enter New Code]. Do not enter the auxiliary code. Press [Cancel] to delete the
code.
The keypad will audibly confirm the deletion from the system.
For more information on this topic please visit the complete
Trouble Conditions
Trouble conditions are issues that require your attention and are indicated on your panel's display by:
No AC to indicate the use of backup battery.
Low Batt to indicate a low battery condition.
Zone number to indicate a zone has been tripped.
Line cut to indicate an interference with the telephone line.
All Trouble Condition alarms can be silenced by pressing the [Cancel] button, however the Trouble
Condition alarm will sound intermittently until the condition no longer exists.
https://alpha.adt.com/help/42.html[11/8/2018 11:52:15 PM]
BHS 2000
manual.
BHS 2000
manual.
Advertisement
