Advertisement
BHS 2000 Quick Guide
To arm in instant mode, press the [On] button, then press the [Instant] button.
To arm without interior motion detectors, press the [On]button, then the [Motion Off] button.
To arm in instant mode with interior motion detectors, press the [On] button, then the [Motion Off]
button, then the [Instant] button.
Disarm:
To disarm, enter your [security code] within the 40 second delay period.
The [On Light] will no longer be lit once the system is disarmed.
For more information on this topic please visit the complete
Battery
The BHS 2000 operates on the
Loss of AC power and use of backup battery power is indicated by NO AC.
A low battery condition is indicated by BAT.
For instructions on replacing your battery, please go to the
battery.
Bypass Protected Areas
Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to
access a protected area when the system is armed.
To bypass a zone, press the [Options] button until the display shows [Bypass, Enter Zone #].
Enter the zone number you wish to bypass.
The display will flash the zone number and show [Ready, Bypass].
Press [On] to arm the system with zones bypassed.
To unbypass a zone, disarm the system.
For more information on this topic please visit the complete
Chimes and Beeps
When your system is in chime mode, a chime alert will sound three tones whenever a protected
door/window is opened.
To turn chime mode on, press the [Options] button until the window shows [Door Chime].
Enter your [security code] to select this option. The display window will show [Ready Door Chime].
https://alpha.adt.com/help/42.html[11/8/2018 11:52:15 PM]
UB 1270 battery
BHS 2000 manual
Battery Replacement Page
BHS 2000
manual.
for this
Advertisement
