Hyundai H-1418 Instruction Manual page 6

button to play the disc in the order you
have programmed.
You can erase the contents of the
memory by one of the following methods:
- opening the CD compartment
- selecting FM or AM source
- pressing PLAY/PAUSE button and
then STOP/FOLDER button
- in the off position
Good quality sound is guaranteed
only when playing licensed discs.
Cassette playback
• Slide FUNCTION switch to TAPE
(OFF) position.
• Press button to open the
cassette compartment.
• Insert a cassette and push the
cassette door to close the cassette
compartment. The full tape reel should be
on the right side.
• Press button to start playback.
• Press button to pause playback.
If you press it again the playback will
continue.
• Press button to stop playback,
press the button again to open the cassette
door so you can take out the tape.
• When the tape plays to the end,
playback will stop automatically.
• Fast forward and rewind: You
can run forward and rewind the tape.
Stop playback. Use
forward and button for fast backward
playback. When you have reached the
desired tape point, press
stop the process.
Never use fast forward or rewind
operations during playback. This may
cause damage to the tape.
button for fast
button to
Instruction manual
Recording
Recording from radio
• Set FUNCTION switch to FM or AM
position.
• Tune to the desired station by turning
TUNING control regulator.
• Insert a blank cassette into cassette
compartment.
• Press button. The recording will
start.
• For brief interruption press
resume recording press the button again.
• To stop recording press
Recording from CD
• Set FUNCTION switch to CD position.
• Insert your cassette tape in the
cassette compartment.
• Start the desired track playback.
• Press button. The recording will
start.
• For brief interruption press
resume recording press the button again.
• Press button when finished.
Then stop CD playback by pressing
STOP/FOLDER button.
• You may want to monitor during
recording. You can adjust the sound with
VOLUME regulator. These adjustments
do not affect the content of recording.
• This deck is not suitable for recording
on CHROME (IEC II) or METAL (IEV
IV) type cassettes. For recording use
NORMAL type cassette (IEC I) on which
the tabs have not been broken.
• At the very beginning and end of the
tape, no recording will take place during
the 7 seconds, when the leader tape
passes the recorder heads.
• When in process of recording or
playback the end of the tape is reached,
button. To
button.
button. To
5