Hyundai H-1418 Instruction Manual page 5

Instruction manual
• Open the CD door by lifting the
handle on the CD compartment. Put a CD
into the CD compartment with the label
side upwards and close the CD door by
pushing the handle.
Play/pause mode
• Press PLAY/PAUSE button to start
playback.
• Press PLAY/PAUSE button to pause
at any track when playing.
• To stop the CD, press STOP/
FOLDER button.
• To remove the CD from the unit,
open the CD compartment. Always press
STOP/FOLDER button before opening
the CD compartment.
• To turn off the CD player, set
FUNCTION switch to TAPE (OFF)
position.
• For MP3 playback: in stop mode,
you can press STOP/FOLDER button to
select your desired album followed by
PLAY/PAUSE button (for MP3 disc with
multiple albums only).
Skip and search mode
During playback you can use
buttons to go to previous or next
track.
• When you have selected a track
number in the stop or pause position, press
PLAY/PAUSE button to start playback.
• Press button once briefly for
the next track, or press repeatedly until
the desired track number appears in the
display.
• Press button once briefly to
return to the beginning of a current track.
• Press button two times to go
to the previous track.
4
Fast backward/ forward playback
Press and hold
buttons to start fast backward or forward
playback until you find the passage to
play from.
Play mode
While playing Audio CD:
• Press PLAY MODE button once for
single track repeat playing.
• Press PLAY MODE button twice for
all tracks repeat playing.
• Press PLAY MODE button three
times for playing randomly.
• Press PLAY MODE button four times
for normal playing.
While playing MP3 disc:
• Press PLAY MODE button once for
single track repeat playing.
• Press PLAY MODE button twice for
track inside the album repeat playing.
• Press PLAY MODE button three
times for all tracks repeat playing.
• Press PLAY MODE button four times
for playing randomly.
• Press PLAY MODE button five times
for normal playing.
or
Program mode
Up to 20 tracks can be programmed for
disc play in any order or the same track
can be repeated up to 20 times. Before
use, press STOP/FOLDER button.
• Press PROG button.
• Select a desired track by using
or
• Press PROG button to confirm.
• Repeat steps described above
to enter additional memories into the
program if necessary.
• When all the desired tracks have
been programmed, press PLAY/PAUSE
or
buttons.