Summary of Contents for HAMPTON BAY AINSWORTH FG-VOL3DN
Page 1
THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this bistro set. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your...
Table of Contents Table of Contents ............2 Hardware Included ............. 4 Safety Information ............2 Table Package Contents..........5 Warranty ................. 3 Chair Package Contents ..........6 What is Covered ............3 Assembly ............... 7 What is Not Covered ..........3 Care and Cleaning ............
Residential use of this furniture is warranted for a three (3) year limited warranty period for the frame construction. The warranty is valid from the date of purchase and applies only to the original purchaser. If your Hampton Bay outdoor...
Pre-Assembly PLANNING ASSEMBLY It will take one or two people about 20 minutes to complete the assembly process. PLEASE READ COMPLETE INSTRUCTION MANUAL PRIOR TO ASSEMBLY! Identify all parts packed in the carton against the parts list. Remove all protective materials and place the parts on a nonabrasive surface to avoid scratching. HARDWARE INCLUDED NOTE: Hardware shown to actual size.
Page 5
Pre-Assembly (continued) TABLE PACKAGE CONTENTS Part Description Quantity Table Top Table Leg Leg Connector Ring Umbrella Hole Cap HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly ASSEMBLING THE TOP TO ASSEMBLING THE BASE THE BASE □ Remove all protective material carefully. Avoid □ Place the Table Top (A) up-side down. Align the bolt scratching the surface of the frames while removing holes on the assembled table base to those on the the packaging material.
Page 8
Assembly (continued) ADJUSTING THE TABLE & FINISHING ASSEMBLY □ With the help of another person, carefully turn the table to up-right position. Check the alignment of the table and adjust if necessary. Once the alignments are correct and all bolts are in place, tighten all bolts with Hex Screwdriver (HH) and Hex Wrench (GG).
Page 9
Assembly (continued) ASSEMBLING THE CHAIR ASSEMBLING THE LEFT LEG BACK & SEAT □ Remove all protective material carefully. Avoid □ Align the Chair Leg (Left) (F) with the assembly hole scratching the surface of the frames while removing on the Chair Seat (H) and attach with Bolts (EE). the packaging material.
Page 10
Assembly (continued) ASSEMBLING THE RIGHT FINISHING ASSEMBLY □ Align the Chair Leg (Right) (G) with the assembly □ Carefully turn the Dining Chair to the up-right hole on the Chair Seat (H) and attach with Bolts position on flat surface. Check the alignment of the (EE).
Care and Cleaning Clean the furniture frame with a wet towel using mild soap and water solution. Dry completely with a soft towel. Clean cushions and sling seat material with a mild solution of soap and water and hang cushions to drip dry completely. It is recommended that cushions be stored in a dry area during rain and if they are not in use and in direct sunlight.
Page 12
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.