Related Manuals for SKILTEC MICRO
Summary of Contents for SKILTEC MICRO
- Page 1 PRODUCT INFORMATION MANUAL SECTION: 1A ALUMINIUM VENETIAN BLINDS ALUMINIUM VENITIAN BLINDS...
- Page 2 PRODUCT INFORMATION MANUAL PRODUCT INFORMATION MANUAL SECTION: 1A ALUMINIUM VENETIAN BLINDS SECTION: 1 ALUMINIUM VENETIAN BLINDS Options & Limitations Venetians - Micro, Slimline & 50mm Classic 25mm 16mm 25mm 50mm SLIMLINE/ MICRO TWI-NIGHTER CLASSIC MAGNAVIEW MAXIMUM WIDTH 3100mm 3700mm 3700mm...
- Page 3 TRIANGLES CIRCLE ARCH A > 150mm (16mm slat) THAN BOTTOM RAIL ISSUE DATE: APRIL 2015 ORIGINATOR: SKILTEC REPLACES ISSUE DATE: JANUARY 2013 APPROVED BY: M.SOMI PAGE 2 OF 13 ISSUE DATE: JUNE 2018 ORIGINATOR: SKILTEC REPLACES ISSUE DATE: JAN 2018 APPROVED BY: J.ZIVANOVIC...
- Page 4 SECTION: 1A ALUMINIUM VENETIAN BLINDS Aluminium Venetian Blind Measuring For 25/25 Headbox using Spring Loaded Mounting Brackets & End Plugs ISSUE DATE: APRIL 2015 ORIGINATOR: SKILTEC ISSUE DATE: JUNE 2018 ORIGINATOR: SKILTEC REPLACES ISSUE DATE: JANUARY 2013 APPROVED BY: M.SOMI...
- Page 5 WIDTH WIDTH -60 BAYS FRONT EDGE -0 ON FACE WIDTH -60 ISSUE DATE: APRIL 2015 ORIGINATOR: SKILTEC ISSUE DATE: JUNE 2018 ORIGINATOR: SKILTEC REPLACES ISSUE DATE: JANUARY 2013 APPROVED BY: M.SOMI PAGE 4 OF 13 REPLACES ISSUE DATE: JAN 2018 APPROVED BY: J.ZIVANOVIC...
-
Page 6: Tools Required
• Steel measuring tape • Carpenter’s level SPRING LOADED • Power or battery drill and bits • Flat blade and Phillips head screwdrivers • Scissors ISSUE DATE: JUNE 2018 ORIGINATOR: SKILTEC REPLACES ISSUE DATE: JAN 2018 APPROVED BY: J.ZIVANOVIC PAGE 6 OF 15... - Page 7 ISSUE DATE: JUNE 2018 ORIGINATOR: SKILTEC REPLACES ISSUE DATE: JAN 2018 APPROVED BY: J.ZIVANOVIC PAGE 7 OF 15...
- Page 8 These brackets help keep the headrail fixed while under tension when operating the blind. ISSUE DATE: JUNE 2018 ORIGINATOR: SKILTEC REPLACES ISSUE DATE: JAN 2018 APPROVED BY: J.ZIVANOVIC PAGE 8 OF 15...
- Page 9 To lower, simply pull the cord towards the centre of the blind and lower gently. 01-F0432.0 Ultimate Venetian Blind Version 3.0 17-3 ISSUE DATE: JUNE 2018 ORIGINATOR: SKILTEC REPLACES ISSUE DATE: JAN 2018 APPROVED BY: J.ZIVANOVIC PAGE 9 OF 15...
-
Page 10: Care And Cleaning
4. Twist the wand to the left to vary the opening of the slats. 5. If a different closing height or other blind desired, repeat steps 2 to 4. ISSUE DATE: JUNE 2018 ORIGINATOR: SKILTEC REPLACES ISSUE DATE: JAN 2018 APPROVED BY: J.ZIVANOVIC PAGE 10 OF 15... -
Page 11: Mounting The Bracket
ISSUE DATE: JUNE 2018 ORIGINATOR: SKILTEC REPLACES ISSUE DATE: JAN 2018 APPROVED BY: J.ZIVANOVIC PAGE 11 OF 15... -
Page 12: Safety Devices
Cord cleats are an effective way to implement this essential precaution. ISSUE DATE: JUNE 2018 ORIGINATOR: SKILTEC REPLACES ISSUE DATE: JAN 2018 APPROVED BY: J.ZIVANOVIC PAGE 12 OF 15... - Page 13 3. To vacuum, use the brush attachment and tilt slats as per point 2 above. 4. Slats may be wiped over with warm water and a mild detergent. ISSUE DATE: JUNE 2018 ORIGINATOR: SKILTEC REPLACES ISSUE DATE: JAN 2018 APPROVED BY: J.ZIVANOVIC...
- Page 14 X=A/2+150cm Y=A/2 Table showing shaft lengths of blinds of different heights “A” Height of blinds Sizes ISSUE DATE: APRIL 2015 ORIGINATOR: SKILTEC REPLACES ISSUE DATE: JANUARY 2013 APPROVED BY: M.SOMI PAGE 13 OF 13 ISSUE DATE: JUNE 2018 ORIGINATOR: SKILTEC REPLACES ISSUE DATE: JAN 2018 APPROVED BY: J.ZIVANOVIC...
- Page 15 Available in 25mm Slimline and Limited Edition Light Lift size limitations: 3.6sqm, width 2000mm, drop 2000mm ISSUE DATE: JUNE 2018 ORIGINATOR: SKILTEC REPLACES ISSUE DATE: JAN 2018 APPROVED BY: J.ZIVANOVIC PAGE 15 OF 15...
Need help?
Do you have a question about the MICRO and is the answer not in the manual?
Questions and answers