Location Of Controls - Memorex MT2365 Owner's Manual

FEATURES
• 181 Channel Tuner - The tuning system is capable of receiving all 68 VHF/UHF standard broadcast channels that are
available in your area. When operating on a cable system, it can tune to the standard VHF channel frequencies plus up to
113 cable channel frequencies. The actual number of channels received depends upon channel reception in your area or
your cable system.
• On-Screen 3 Language Display - This TV can display the on screen language in English, Spanish or French.
• Sleep Timer - Operable from the remote control, this TV can be programmed up to 120 minutes to turn off automatically.
• Memory Back Up - This system prevents loss of memorized channel selections in case a power interruption to the TV
should occur.
• V-Chip - The V-Chip function can rate a TV program or movie content. It allows you to set a restriction level.
• Picture Control Adjustments - The On-Screen display allows precise remote control adjustment of BRIGHTNESS,
COLOR, CONTRAST, SHARPNESS and TINT.
• Closed Captioned Decoder - Displays text captions or 1/2 of full screen text on the screen for hearing impaired viewers.
• Stereo/SAP Reception - This TV designed to receive stereo and separate audio program (SAP) broadcasts where
available.
• BEE- BBE gives you the vivid sound with incredible presence.
• Universal Remote Control - You can operate your VCR and Cable/Satellite Box after you registered the 2-digit codes for
their brand name.

LOCATION OF CONTROLS

FRONT
POWER
1
1. POWER Button - Press to turn the TV on or off.
2. VOLUME / Buttons - Press to raise or lower
the volume of the sound.
(MENU Buttons) - Press the both buttons to display
the On-Screen menu function.
(SET+/– Buttons) - Press to select the desired
setting during On-Screen operations.
3. CHANNEL / Buttons - Press to select a higher
or lower numbered channel set into memory.
(ENTER Button) - Press to enter or select informa-
tion for On-Screen operations.
(RESET Button) - Press to reset the On-Screen
picture and sound adjustments to their factory preset
positions. Press to reset a password in the V-CHIP
Password setting mode.
4
3I60201A E/COV-09
SET (MONO)
VOLUME CHANNEL VIDEO IN L – AUDIO IN – R
MENU ENTER RESET
2 3 4 5
4
BACK
VIDEO
MONO
L
AUDIO
ANT
R
OUT IN
6 7 8
4. Remote Sensor - Signals from the Remote Control
unit are received here.
5. AUDIO (L / R) / VIDEO IN Jacks - Audio and video
signal cables from an external source can be
connected here.
6. VHF/UHF IN (ANT) Jack - Connect a VHF/UHF
antenna or CATV cable to this jack.
7. AUDIO (L / R) /VIDEO OUT Jacks - Used to output
audio and video signals to a TV, amplifier or VCR.
8. AUDIO (L / R) /VIDEO IN Jacks - Audio and video
signal cables form an external source can be
connected here.
9. S-VIDEO jack - S-Video signal cable from an
external source can be connected here.
10. AC Power Cord - Connect to a 120V, 60Hz outlet.
03*02*2000, 22:40
S-VIDEO
9 10