Ⅱ. 2 Rf -Contact Closure Setup - Inter-m RFA-102 Operation Manual

RECEIVER FOR OE
Ⅱ. 2 RF -Contact closure Setup
bove is a screen display when "RF -Contact closure Setup" menu is clicked.
① Select contact service operation status.
② Selecting contact control number for reception of contact information is accessible with sub device. Only
within the selected contact control number, the command is applied.
③ Reset stands for the default of contact closure when the service stops.
④ In case the contact closure actives, the operating of contact closuredelays.
Maximum delay up to 9 seconds 900 miliseconds.
⑤ It describes the prevention of downtime of service and dispersion ofservice load. When the main server
breaks down, it switches to theredundancy server.
⑥ IP address: Connect to the server with the preset IP address to connectserver.
Port: Put the port number related to the server to connect.
⑦ Click [ pply] button to apply the modified setting.
Click [Initialize] button to reset to the previous data setting.
※ udio cannot be played when contact signal is received from set contact number.
4
RF -102