Accessing The Mecip-Sec Web Front-End; Via Windows Explorer - TAPKO MECip-Sec Product Description

6.2

Accessing the MECip-Sec Web Front-end

There are three ways to access the MECip-Sec web front-end. It can be accessed via Windows
explorer directly, or by a web browser. For access via web browser, either the IP address or
the MAC address, together with the HTTP port, have to be known. How to use IP address and
MAC address with the browser´s URL bar is described in the following.
For access via web browser, the correct HTTP port must be used.
Factory default HTTP port is 8080.
6.2.1

via Windows Explorer

When the web front-end is set to be available, MECip-Sec appears in the local network
window (due to UPnP discovery). A double click on MECip-Sec, indicated by its set Product
Name, opens the web front-end in the standard web browser.
Changing MECip-Sec´s name that is shown in the network can be done by setting a new
Product Name in the Properties window of ETS. After downloading the changed data to the
device, the name of the network device is actualized.
Figure 20: Windows Explorer showing MECip-Sec
Figure 21: Product Name Setting
Web Front-end
MECip
SECURE
- 32 -