Advertisement
Quick Links
Installation guide
DALI Control Panel
Introduction
The DALI control panel provides complete
control of pre-programmed lighting scenes
within a DALI lighting control system. The
adaptable design allows you to choose from
a range of button combinations, which can be
fitted and changed at any time. Where fitted,
raise and lower buttons compliment the usual
selection buttons to allow immediate changes
to the intensity of any scene.
Dimensions
Back Plate
Front Cover
Fixing to a wallbox
The DALI control panel fits into a single gang
UK style wall box with a minimum internal
depth of 47mm.
With control panel disassembled (see above),
use the two supplied long screws to secure
the back plate to the wall box.
Care and Maintenance
The front cover plate should only be cleaned
gently with a clean, damp cloth. Abrasive
cleaners, polishes, solvent based cleaning
agents, or alkali based cleaners should not be
used.
Button Assembly
Screw holes for attaching
to wall box
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for iLight DALI Control Panel
Summary of Contents for iLight DALI Control Panel
- Page 1 Screw holes for attaching to wall box Dimensions Fixing to a wallbox The DALI control panel fits into a single gang UK style wall box with a minimum internal depth of 47mm. With control panel disassembled (see above), use the two supplied long screws to secure the back plate to the wall box.
- Page 2 3. Store face plate safe from damage. Changing buttons The DALI control panel allows you to change the buttons in order to customize its appearance. 1. Remove the face plate as illustrated. 2. Locate the four clips (two on each side) of the button frame.
- Page 3 Control wiring The DALI Control Panel is provided with 2 x polarity-free wires used to connect to the DALI line. Standard Recommended DALI cabling: 2-core cable of minimum gauge 1.5 mm The total cable distance: 300m. 2 x polarity-free wires...
- Page 4 Email: cctechsupport@cooperlighting.com Web: www.iLight.co.uk All products manufactured by Cooper Lighting Solutions and identified with the iLight product series mark are warranted to be free from defects in material and workmanship and shall conform to and perform in accordance with Seller’s written specifications. For detailed warranty information, contact Cooper Lighting Solutions.
Need help?
Do you have a question about the DALI Control Panel and is the answer not in the manual?
Questions and answers