Other Functions; Indoor Infrared Sensor Unlock; Outside Forced Lock - Philips EasyKey 7000 Series User Manual

6. Other functions

Indoor infrared sensor unlock

Infrared sensor
Rear inductive position
Front inductive position
Attention
When the infrared sensor unlocking
is disabled, the indoor inductive
unlocking would be inactive. When
you touch both the front and rear
side of the inductive position on
the handle, the red light will light
up to remind you that the indoor
inductive unlocking is off.

Outside forced lock

Outside forced lock button
18
Function:
Once the indoor infrared sensor
unlocking is enabled, you could easily
unlock the door from inside.
How to use:
Philips Easykey has an infrared sensor
on the handle. When the sensor is
triggered, you can press the sensor
module on both sides of the handle
simultaneously to unlock the door.
Enable/Disable:
When the infrared sensor unlocking is
disabled, long press the [OPEN/CLOSE]
button at the same time to turn on the
function, and the green light will glow
quickly;
When the infrared sensor unlocking is
enabled, long press the [OPEN/ CLOSE]
button at the same time to turn off the
function and the red light will glow
quickly.
Function:
Unlocking from inside will trigger an
alert.
How to use:
After the door is successfully locked,
long press the button for 2 seconds to
enter the outside forced lock mode.
Attention
Enabling the outside forced lock function
will not affect the normal way to unlock the
door from outside.