Related Manuals for BE Ag & Industrial CAR-TM Series
Summary of Contents for BE Ag & Industrial CAR-TM Series
- Page 1 FLAIL MOWER CAR-TMXXXX OPERATIONS & PARTS MANUAL FOR MODELS: • CAR-TM1300 • CAR-TM1600 • CAR-TM1900 PURCHASE DATE MODEL NO. SERIAL NUMBER DEALER...
- Page 2 TABLE OF CONTENTS SAFETY PRODUCT SPECIFICATIONS OPERATION SERVICE & MAINTENANCE STORAGE TROUBLESHOOTING EXPLODED VIEWS & PARTS LISTS...
-
Page 3: Marking And Identification
FOREWORD CARONI SPA would like to thank you for your preference in choosing our quality machines. Aiming at obtain the longest possible efficiency of the machines, you have purchased, we kindly invite you to read and thoroughly understand the instructions for use and maintenance in this manual. A careful compliance with these instructions permits to prevent troubles and accidents or injuries caused by carelessness or lack of compliance with the safety standards and in that case our company shall not be held liable. -
Page 4: Warning Pictograms
WARNING PICTOGRAMS The following warning pictograms can be found on the machine (see fig. 4) 1. Identification Signal: Indicates the data relevant to the machine. 2. Indication Signal: Indicates the direction of rotating of the machine. 3. Warning Signal: Indicates it is necessary to fill the reduction unit with oil when the piece of equipment is used for the first time. - Page 5 Should it be impossible to find the data useful to choose the right tractor, the user shall make sure of having someone check that suitable safety margins are applied at work, the max. load limit of the axles is not exceeded and the breaking ability is adequate.
- Page 6 USE IN SAFETY CONDITIONS Most accidents that take place at work, maintenance operations and machine displacement are due to lack of compliance with the most elementary norms of accident prevention. Therefore, it is essential for those who are authorized to use the machines to read and thoroughly follow both the instructions below and the stickers applied to the machine.
- Page 7 IN THE VARIOUS WORKING POSITIONS the PTO shaft transmission hoses shall telescopically insert of at least 150mm as shown in the figure below. Repeat the check when the tool is hitched to a different tractor. ANY MODIFICATIONS to the PTO shaft are strictly prohibited. It is strictly prohibited to cut the PTO shaft in order to adapt its lenght.
-
Page 8: Maintenance
MAINTENANCE Carry out all the operations for start up, when the tractor engine is stopped, the PTO shaft is disconnected and all the transmission parts to the tools are stopped. Once your work is over, wash the underframe thoroughly in order to keep the machine perfectly effective. - Page 9 During the period when the machine is not used, carry out the cleaning and maintenance operations specified in chapter 6 of the manual and store the machine in a dry and sheltered place. To transport the machine on public roads, follow the highway code in force in your country. CAR-TMXXXX USER MANUAL...
- Page 10 CAR-TMXXXX USER MANUAL...
- Page 11 CAR-TMXXXX USER MANUAL...
-
Page 12: Exploded View And Parts List
EXPLODED VIEW & PARTS LIST CAR-TMXXXX USER MANUAL... - Page 13 REF PART NUM DESCRIPTION REF PART NUM DESCRIPTION 1234 Fitting 10006300 Cover 10004300 Belt Stretcher 1659 Screw 1546 Cir Clip 10013500 Complete Trans. Box 1545 Cir Clip 1078 Screw 1112 Bearing 2011 Screw 20005610 Stretcher 1225 Washer 1088 Screw 1080 10013200 Rotor 1900 10007800...
- Page 14 B RA B E R EQ .CO M WGSALES@BRABEREQ.COM PHONE: 604-850-7770 FAX: 604-850-7774 TOLL FREE PHONE: 1-877-588-3311 TOLL FREE FAX: 1-800-665-7334 CAR-TMXXXX USER MANUAL...
Need help?
Do you have a question about the CAR-TM Series and is the answer not in the manual?
Questions and answers