ProFlow PFEFS13204 Installation Manual

Carburettor Bypass Fuel Pressure Regulator
PFEFS13204 Fuel Pressure Regulator
PFE932-04BK Socket Plug 1/8" NPT
PFE358 1/16" NPT to 5/32" Barb
PFEFS13204 Mounting Bracket and Screws
WARNING: PLEASE READ ALL INSTRUCTIONS BEFORE PROCEEDING. PROFLOW WILL NOT BE
RESPONSIBLE FOR ANY DAMAGE AS A RESULT OF THE INCORRECT INSTALLATION OF THIS
PRODUCT. IT IS RECOMMENDED THAT A QUALIFIED AUTOMOTIVE TECHNICIAN PERFORMS THIS
INSTALLATION.
WARNING: THE INSTALLATION OF THIS PRODUCT REQUIRES THE HANDLING OF FUEL. IT IS
RECOMMENDED TO WORK IN A WELL-VENTILATED AREA AND WEAR APPROPRIATE PERSONAL
PROTECTION. KEEP ALL IGNITION SOURCES AND FLAMES AWAY FROM THE VEHICLE AT ALL TIMES.
DO NOT OPEN THE FUEL SYSTEM UNTIL THE PRESSURE HAS BEEN RELIEVED.
Description
This Proflow regulator utilies one o-ring sealed AN10 ORB style inlet port, two o-ring sealed
AN6 ORB outlet ports and one o-ring sealed AN8 ORB return port. These ports are not pipe
thread and require no thread sealant. To use the enclosed regulator in your vehicles fuel
system, you must install the necessary adapter fittings and o-rings, fuel lines and/or fuel rails
to adapt your fuel system to the configuration and ports of this fuel pressure regulator.
EMAIL: sales@proflow.com.au
PHONE: 1300 879 879
Installation Manual
PFEFS13204
Included Items QTY
1
2
1
1