Table of Contents
Advertisement
Quick Links
OPOP pump groups
Installation manual
Pump group simplifies the installation of automatic boilers such as reducing the
time required for the boiler connection to the heating system. The pump groups
are equipped with thermostatic valve and pump so this guarantees the boiler
protection against low-temperature corrosion.
This manual serves plumber for information about the installation and proper
use. Read the instructions carefully so that the equipment is operated in
accordance with the instructions.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Opop Biopel 10
Summary of Contents for Opop Biopel 10
- Page 1 OPOP pump groups Installation manual Pump group simplifies the installation of automatic boilers such as reducing the time required for the boiler connection to the heating system. The pump groups are equipped with thermostatic valve and pump so this guarantees the boiler protection against low-temperature corrosion.
- Page 2 CONTENT: 1. Packaging _______________________________________________________________________ 2. Labeling ________________________________________________________________________ 3. Mounting _______________________________________________________________________ 4. Technical specification _____________________________________________________________ 5. Warranty conditions _______________________________________________________________ 6. Warranty card____________________________________________________________________...
- Page 3 2. LABELING OPOP company sells to its automatic boilers several versions of the pump groups. Group type associated with a particular type of boiler, on which the pump goup will be mounted. According to the designation of the pump, check if given pump group is compatible with the type of boiler.
- Page 4 Automatic boilers – OPOP pump groups Safety valve Heated water outlet Heated water outlet to the Cooled water inlet heating system circuit Auto adapt pump Cooled water inlet from the heating system circuit Use sink for boiler temperature sensor and the return sensor, which is placed directly on the pump group.
- Page 5 Automatic boilers – OPOP pump groups 5. WARRANTY CONDITIONS AND GENERAL INFORMATION All requirements below must be fulfilled by installer and end user to fulfill warranty conditions and also to ensure correct installation in terms of the applicable standards, and safety from the perspective of ensuring the non-problematic usage of the boiler and all other equipment.
- Page 6 Automatic boilers – OPOP pump groups 6. STANDARDS AND REGULATIONS There standards must be met durng boiler installation and usage. Informations below are ment for installers as a support files for installation and boiler start up. Heating system: The heating system must be filled with water that meets requirements of ČSN 07 7401 and especially its hardness must not exceed the required parameters: hardness = 1mmol/l, Ca2+ = 0,3mmol/l, concentration of total Fe+Mn = 0,3mg/l.
- Page 7 Automatic boilers – OPOP pump groups 7. WARRANTY CARD OPOP pump groups Producer: OPOP spol. s r.o., Valašské Meziříčí, Česká republika Tel.: 00420 571 675 589, fax.: 00420 571 611 225 Instructions for complaint procedure: This warranty certificate includes a certificate of quality and completeness. The manufacturer certifies that the product is inspected and meets its design specifications and EN 303-5.
- Page 8 Automatic boilers – OPOP pump groups OPOP, spol. s r. o. Zašovská 750 757 01 Valašské Meziříčí Bank details: Komerční banka a.s., account no.:1608851/0100 Reg. no.: 47674105, VAT no.: CZ 47674105 Phone: Sales Dept: 571 675 589, Secretariat: 571 611 250, Production: 571 675 405 Sourcing: 571 675 114, Finance: 571 675 472 Fax.
Need help?
Do you have a question about the Biopel 10 and is the answer not in the manual?
Questions and answers