Page 4
Unless you are particularly adept at assembling flat-pack/knock-down furniture, we understand building ready-to-assemble furniture can be a frustrating experience for some. To help avoid confusion and to make the assembly process quicker and smoother, we have provided some helpful tips. Before you begin the assembly, please read the following : Page 4 of 16...
Page 15
To adjust the door in or out,loosen this screw and push the door further in or push further out then retighten screws. To adjust the door vertically, loosen the top and bottom screws, push the door up or down as necessary, then retighten screws. To adjust the door left/right, turn this screw clockwise to move this corner Refer to the last page...
Page 16
Height Adjustment Located at the top and bottom of the hinge are two screws that mount the hinge to the cabinet. Turn these first to make sure the door is secure. If the door is still too high or low, loosen these screws slightly and then lift or lower the door until it is in the position you want.
Need help?
Do you have a question about the 161549 and is the answer not in the manual?
Questions and answers