Seco SC - 010D433 Manual page 3

Cautions:
1) Do a memory clear
2) Please be sure that your original remote control is a fixed code one (sometimes work also with rolling code remotes
in case of the control board recognize them as a fix code)
3) If any button of remote duplicator keeps being pressed for a long time, the remote will stop transmitting after 15s
to save power.
4) If you face any problem to copy a code please replace the battery with a new one in your original remote. Some-
times even if the code it's looks like coped successfully the duplicator hasn't stored it correctly due to original remo-
te weak signal which a result of an old battery.
5) A tip that helps sometimes is to hold the original remote control under the duplicator remote in a way that the back
casing of both remotes to be in contact (back to back) during the copy code process.
Technical Characteristics
Antenna type: Internal
Transmitting distance: >40m / 131.23 ft. at 433.92MHz (open space, line of sight)
Operating frequency: 433.92MHz (crystal-controlled) / Customized frequency available for volume order
Frequency synthesizer: SAW resonator for fixed frequency model, with stability better than 75KHz from the center fre-
quency
Learning mode: Original code is learned automatically, notifying the result through the LED built-in
Led: Blue
Channels: 4
Color: Black with a metallic frame
Material: ABS / Metallic ABS
Button number: 4
Battery type: 1 x CR2032
Tel. 0030 210 9846222
Fax 0030 210 9822276
Agiou Dimitriou 263, TK. 17342, Athens, Greece
www.seco.gr
MANUAL