Axis P1445-LE-3 User Manual page 8

AXIS P1445-LE-3 License Plate Verifier Kit
Get started
- Relay if you want to connect to a relay module. See Open a barrier for known vehicles using a relay module
on page 17.
3. In the Barrier mode drop-down list, under Open from lists, select Allowlist.
4. In the Vehicle direction drop-down list, select out.
5. In the ROI drop-down-list, select the area of interest you would like to use, or if you would like to use all.
6. Click Next.
On the Image settings page:
1. Select the number of areas of interest.
2. Select the region where the camera is located.
3. Select capture type. See Adjust the image capture settings on page 11 .
4. Drag the anchor points to adjust the area of interest. See Adjust the area of interest on page 10.
5. Adjust the direction of the area of interest. The direction determines how the application registers vehicles entering
or exiting the area.
6. Click Next
On the Event data page:
Note
For detailed settings see: Push event information to third-party software on page 23.
1. In the Protocol drop-down list, select one of the following protocols:
- TCP
- HTTP POST
2. In the Server URL field, type the server address and port in the following format: 127.0.0.1:8080.
3. In the Device ID field, type the name of the device or leave as is.
4. Under Event types, select one or more of the following options:
- New means the first detection of a license plate.
- Update is either a correction of a character on a previously detected license plate, or when a a direction is
detected as the plate moves and is tracked across the image.
- Lost is the last tracked event of the license plate before it exits the image. It also contains the direction of
the license plate.
5. To turn on the feature, select Send event data to server.
6. To reduce bandwidth when using HTTP POST, you can select Do not to send images through HTTP POST.
7. Click Next
On the Import list from a .csv file page:
1. If you already have a list of registered plates, choose to import as either a blocklist or allowlist.
2. Click Finish.
8