Vehicle Entry And Exit Scenario; Open A Barrier For Known Vehicles Using A Relay Module - Axis P1445-LE-3 User Manual

AXIS P1445-LE-3 License Plate Verifier Kit

Vehicle entry and exit scenario

Vehicle entry and exit scenario
In the scenario for vehicle entry and exit, the application reads the vehicle license plate captured by the camera and verifies the
license plate against a list of authorized or unauthorized license plate numbers stored in the camera.
This scenario requires the application embedded in a camera with I/O support or a connected I/O relay module to open and close the
barrier.
1
Axis camera with AXIS License Plate Verifier
2
I/O communication
3
Barrier
4
Axis I/O relay module
5
IP communication

Open a barrier for known vehicles using a relay module

This example use case explains how to set up AXIS License Plate Verifier together with a relay module to open a barrier for a known
vehicle driving through a specific region of interest (ROI) into, let's say a parking area.
Requirements:
• Camera physically installed and connected to the network.
• AXIS License Plate Verifier up and running on the camera.
• Cables connected between the barrier and the relay module.
• Basic setup done. See Basic setup on page 4 .
1. Go to the camera's webpage, select Settings and open AXIS License Plate Verifier.
2. Go to the relay module's webpage and make sure the relay port is connected to the camera's I/O port.
3. Copy the relay module's IP address.
4. Go back to AXIS License Plate Verifier.
Two possible setups for the vehicle entry and exit scenario.
17