Related Manuals for NTC SGUALA'
Summary of Contents for NTC SGUALA'
- Page 1 SGUALA’ USER MANUAL NTC srl – Sales Office Manual Code UME-TSG02-07/21 www.newtableconcept.com All rights reserved...
-
Page 2: Table Of Contents
SUMMARY INTRODUCTION ___________________________________________________ 3 CONTENT ________________________________________________________ 3 PARTS DESCRIPTIONS _____________________________________________ 4 REQUIRED TOOLS _________________________________________________ 5 WARNINGS _______________________________________________________ 5 UNPACKING ______________________________________________________ 5 ASSEMBLY _______________________________________________________ 6 OPENING AND CLOSING ____________________________________________ 9 CLEANING AND MAINTENANCE _____________________________________ 9 10. WARRANTY _____________________________________________________ 10 UME-TSG02-07/21 www.newtableconcept.com Page 2... -
Page 3: Introduction
INTRODUCTION Dear Customer, thank you for choosing the SGUALA’ sliding table. The SGUALA’ sliding table is built with high quality materials and extensive attention to details. We are confident that you will appreciate the value of our product and enjoy its convenient, space-saving and aesthetic features. -
Page 4: Parts Descriptions
PARTS DESCRIPTIONS The table is made up of three main components, which are: the stainless-steel rails to be fixed to the wall the variable parallelogram metal structure to be connected to the sliders of the rails the tabletop to be screwed over the parallelogram metal structure (Fig. 2). Fig. -
Page 5: Required Tools
The table will be mounted to the wall which is a fundamental element for table stability in both working and closed positions. It is important to mount the table on a wall suitable for securing table stability. NTC srl guarantees table strength but is not responsible for wall failures or unsuitable mounting on the wall. -
Page 6: Assembly
ASSEMBLY 1. Decide where you want to have the table and make sure the wall is appropriate for mounting and can safely hold the weight and stresses to which it will be subjected. The wall must be flat, free of any obstacles (electrical outlets, air intakes, etc.) and with the height adequate to accommodate the table size. - Page 7 Fig. 10 10. Unscrew the four screws that hold the parallelogram structure to the table board during shipping and collect them for the mounting of the board. 11. In order to facilitate the assembly, it is convenient to move the parallelogram structure opened. Before taking the structure out from the cage, remove the nylon that holds the two carriages bounded to the frame and open the parallelogram structure completely by lifting the lower parts of the main carriage.
- Page 8 Fig. 14 Fig 15 14. Move the structure toward to the rails slightly oblique so that it is closer to one of the two rails. Starting from the nearest rail, adjust the positioning of the slides so that the screws enter the slots of the sliding carriage plates pushing the structure further (Fig 15).
-
Page 9: Opening And Closing
Fig. 17 22. With the table in open position, make sure that the locking hook is centered horizontally and vertically with the hole present in the right rail and that it always enters the hole any time you open the structure. 23. -
Page 10: 10. Warranty
The broken parts will be replaced free of charge. The shipping expenses will be charged to the customer. To make a claim under the warranty, send an e-mail to support@newtableconcept.com with a description and pictures of the defect. NTC srl reserves the right to modify the product without any notice. UME-TSG02-07/21 www.newtableconcept.com Page 10...
Need help?
Do you have a question about the SGUALA' and is the answer not in the manual?
Questions and answers