Mackie PPM608 Owner's Manual page 8

Wireless
Microphone
Microphones
Graphic EQ
Wireless Mic
Receiver
MAIN OUT BOOTH
L R L L
LINE
MIC
LIVE
RECORD
R L(MONO)
~100-240 VAC 50-60Hz 20W
L
R
Turntables with phono-level output
This diagram shows a wireless microphone receiver connected to the channel 1 line input, a graphic
EQ connected to channel 1's insert jack (to help control feedback in the wireless mic), a microphone
connected to channel 2, and an iPod docking station attached to channel 8's RCA inputs.
A Mackie d.2 Pro is connected to two turntables, and its RCA output connects to the powered mixer's
channel 7 stereo RCA inputs. Use the d.2 Pro's advanced DJ controls to get the best performance from
your records. Use the powered mixer to play the d.2 Pro output, and control the mics and iPod.
The power amp mode switch is set to play the stereo main mix in the Mackie C300z passive speakers,
connected to the speaker-level power outputs.
Passive subwoofers are powered by an amplifier connected to the main mix sub out to reinforce the low
end in the main mix.
8
PPM608
iPod TM Docking Station
Mackie d.2 Pro
DJ Production Console
FX PGM 2 PGM 1 MIC
PHONO CD PHONO CD
SEND
R L L L L
R R R R
RETURN
R
LINE LINE
GND GND
PHONO PHONO
Front Panel
Power
Amplifier
dual-mono
mode
Passive Subwoofers
(plays main mix below 100 Hz)
DJ System
Power Amp Mode
switch set to
Stereo Mains
Rear Panel
C300z Passive Speakers
(plays stereo main mix)