Appendix C: Technical Info - Mackie DJ Mixer Owner's Manual

Appendix C: Technical Info

Specifications
Frequency Response (20 Hz to 20 kHz) :
Mic input to any output:
Line/CD input to any output:
Phono input to any output:
FireWire output channel 1 or 2 to the
FireWire input of the opposite channel:+0/–1 dB
Distortion (THD+N):
Main output, 20 Hz to 20 kHz
Mic Input, –20 dBu in, +30 dB gain, +10 dBu out:
Line/CD input at unity gain:
Phono input, –30 dBu in, 0 dBu out: Better than 0.020%
FireWire direct out, looped back to same
channel's FireWire input, unity gain: Better than 0.025%
Phones output, 20 Hz to 20 kHz, +4 dBu input signal
Line input @ 0 dB Gain:
Common Mode Rejection Ratio (CMRR):
Mic input, maximum gain, 1 kHz:
Crosstalk (1 kHz, 20 Hz to 20 kHz):
Signal placed on any channel, transform switch disengaged, op-
posite channel measured at main outs, channels at unity gain:
Signal placed on any channel, out and in over FireWire, trans-
form switch disengaged, opposite channel measured at main
outs, channels at unity gain:
Noise Characteristics:
Equivalent Input Noise (E.I.N.), 20 Hz to 20 kHz, max gain:
Mic input, 150 Ω source:
Phono input, 500 Ω/500 mH source: Better than 0.3 μV
Signal to Noise Ratio:
Main out at unity, 20 Hz to 20 kHz, ref +4 dBu,
all channel gain knobs at minimum: Better than –92 dB
Main out at unity, 20 Hz to 20 kHz, ref +4 dBu,
all channel gain knobs at unity:
Main out at unity, 20 Hz to 20 kHz, ref +4 dBu, FireWire
inputs selected at both channels and at unity:
Maximum Input Levels (rated at 1% THD):
Mic input, preamp gain at minimum: +9.5 dBu
Line/CD inputs, preamp gain 0 dB:
Aux input:
Phono input:
Input/Output Characteristics:
Input gain control range:
Mic input:
(+10 dB fixed gain, effective range: +13 dB to +60 dB)
PGM input:
Aux return:
Output gain control range:
Main output:
Aux output:
Booth output:
Input Impedance:
+0/–0.5 dB Mic input:
+0/–0.5 dB
Line/CD input:
±0.5 dB RIAA EQ curve
FX return:
Phono input:
Maximum Output Levels:
XLR main output:
RCA main output:
Better than 0.007%
Booth output:
Better than 0.015%
Aux send:
Phones:
Output Impedance:
Main XLR/RCA output:
Better than 0.015%
Booth output:
Aux send:
Better than 60 dB
Phones:
Equalization
Mic channel
Better than –70 dBu
Better than –80 dBu PGM channel
Better than –125 dBu
FireWire:
Sample rates available:
Buffer Size:
Better than –88 dB
Resolution:
VU Meters
Better than –82 dB
12-segment pre-fader PGM meters
12-segment pre-fader main mix meters
OL (+20), +15, +10, +6, +3, 0, –2, –4, –7, –10, –20, –30
Mic input signal present LED (sensitivity):
+22.5 dBu
+22.5 dBu
Mic input overload LED:
185 mV @ 1kHz
AC Power Requirements:
Power consumption:
Universal AC Power Supply:
+3 dB to +50 dB,
Off to +13 dB
Off to +13 dB
Off to +12 dB
Off to +12 dB
Off to 0 dB
Low:
Mid:
High:
Low:
Mid:
High:
2.4 kΩ balanced
20 kΩ balanced
20 kΩ balanced
47.5 kΩ shunted with
200 pF
+22.5 dBu
+22.5 dBu
+22.5 dBu
+22.5 dBu
2.94 Vrms into 32Ω
(270 mW)
150 Ω
150 Ω
150 Ω
25 Ω
±15 dB @ 80 Hz
±15 dB @ 2.5 kHz
±15 dB @ 12 kHz
+10/–inf dB @ 300 Hz
+10/–inf dB @ 1 kHz
+10/–inf dB @ 4 kHz
44.1 kHz, 48 kHz,
88.2 kHz, and 96 kHz
Adjustable from 2 ms to
20 mS in steps of 1 ms
24-bit
–20 dBu
+18 dBu
25 watts
100 VAC – 240 VAC,
50–60 Hz
continued
Owner's Manual
21