Operator Training; Warranty Of Barreto Manufacturing Equipment; Maintenance Preparation - Barreto E30SG Owner's Manual

Rental companies should demonstrate all of the machine operations to each rental customer including:
• Starting up the engine.
• Loading the stump grinder onto the trailer and securing it for road transport.
• Unloading the stump grinder from the trailer.
• Grinding procedure - Operation of the stump grinder.

WARRANTY OF BARRETO MANUFACTURING EQUIPMENT

Barreto Manufacturing, Inc. warrants all BARRETO equipment to be free of defects in material and
workmanship for a period of one (1) year. All BARRETO fuel components, fuel tank, cap, lines &
fittings are warranted for two (2) years. Warranty period begins on date of delivery to the original user.
This warranty is in lieu of all other warranties, whether written or implied, and is limited to:
1. Replacement of parts returned to the dealer and/or factory and determined defective upon
inspection. (Replacement for parts to dealers shall be at dealer cost plus shipping charges.)
2. Time for pick-up and/or delivery, transportation of service calls by dealers is excluded.
Manufacturer reserves the right to determine reasonable time required for repair.
Warranty does not apply to damage caused by abuse or neglect. Time and materials required for
normal maintenance and service are also excluded from warranty coverage.
Engines, engine attached fuel tanks, engine accessories, batteries and tires are warranted by the
original manufacturer and are not covered by the Barreto Equipment Warranty.
Wear parts such as cutter wheels and teeth, holders and bolts, dig chains, dig teeth, sprockets,
chain rollers, bearings, bushings etc. are excluded unless it can be determined that a defect has
contributed to premature wear.
Only trained & qualified personnel should perform maintenance or repairs of the stump grinder. Before
performing any service, maintenance, adjustments, repairs, or off-season long-term storage, follow the
SHUT DOWN PROCEDURE in the OPERATOR'S MANUAL.
Do not touch the engine, muffler, or any of the hydraulic components until cool.
WARNING: Muffler and engine get hot enough to cause serious burns. For
the safety of yourself and others, allow enough time for the engine, muffler,
and the hydraulic fluid to cool completely before performing any cleaning or
maintenance.
Avoid contact with hydraulic fluid.
WARNING: When machine is operating, hydraulic fluid is under extreme pressure and can get
under skin and burn or poison.
Read the BATTERY & ELECTRIC STARTER SAFETY INSTRUCTIONS. Disconnect the battery,
removing the negative terminal first by loosening the wing nut where the cable end is secured to a post on
the stump grinder frame. When ready to reattach the cables, reconnect the positive terminal first.
30SG OWNER'S MANUAL

OPERATOR TRAINING

MAINTENANCE PREPARATION

5/6/21 Page 6 of 19